Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

compressor (insert bad words here...)

Posts

compressor (insert bad words here...)

#1

Steven Antonucci

compressor (insert bad words here...)

Steven Antonucci

I have a big box 26 gallon compressor and it has never really given me any problems until today.

With 90 psi in the tank and still running, I suddenly lost air at the hose end. Tank still pressurizes, but no air coming out? Drained and refilled... but at a loss what else I might be able to do? Unplugged it too. Still nothing...

Ideas?

Steve

Re: compressor (insert bad words here...)

#2

Dennis in Southern Oregon

Re: compressor (insert bad words here...)

Dennis in Southern Oregon

Steve, this sound like the thread that John Lucas started last week. Have you read it? If you have pressure in the tank, but none at the output of the regulator, then either you have a plug-up or the regulator is not working.

Dennis

Re: compressor (insert bad words here...)

#3

Bad Words Aside

Mark Mandell - Gone Round In New Jersey

1. Your output regulator valve made be blocked/stuck or it might (most likely) even be turned off (it happens).

2. Your tool (at the hose end) may have a corroded/stuck valve - put air chuck or other tool on the hose and retry.

If 1 or 2 don't fix, drain the tank then start disassembly of the output reg and followed by the pressur-trol to find the blockage. If you don't drain the condensate from your tank regularly, a chunk of tank rust can easily break free and block your air ports and valves.

Re: compressor (insert bad words here...)

#4

Dennis in Southern Oregon

Re: compressor (insert bad words here...)

Dennis in Southern Oregon

I forgot to add that my ancient Craftsman compressor had similar symptoms several years ago. It turned out that the adjustment knob for the regulator had stripped loose from the threaded rod that actuates the regulator. A bit of epoxy solved the problem.

Dennis

Re: compressor (insert bad words here...)

#5

Steven Antonucci

Resolution...sort of?

steven antonucci

I was talking to a guy about how to fix it, and he also thought it was the regulator. Problem is that the compressor has a plastic box with electronics on it, and it was probably inside the box. I wasn't in the mood to pull it apart, but while talking to Wil, he thought it might be clearable if I tried to switch pressures in case it was in the solenoid.

So, I pushed a bunch of buttons to jack the pressure up and then down, and it eventually started to release pressure to the hose. No idea if something got stuck in the regulator, but it is out now.

Thanks for all of the help.

Steve

Re: compressor (insert bad words here...)

#6

Re: compressor (insert bad words here...)

ihmserv

this must be the week for compressors, my shop compressor blew a seal lost all its oil and seized up. luckily my boss had replaced my work compressor 4 months ago since his was junk I kept mine its now the shop compressor. quick fix.

IAN

Re: compressor (insert bad words here...)

#7

Mine

Mark Mandell - Gone Round In New Jersey

Had it's auto drain acting iffy this morning. So tore it down, cleaned and lubed it, put it back on. Works again. My bad as I let it go about 3 months past its maintenance date.

Re: compressor (insert bad words here...)

#8

Mine too

Jorge

My ancient 20 gals is having trouble building compression, I did flush all the air and was opening the drain plug when it blew it out of my fingers! It still had pressure after I squeezed the gun until nothing came up and a bunch of really gooey water came out. I did find the plug and fired it again, same slow build pressure up.

Any ideas?

Re: compressor (insert bad words here...)

#9

Re:  Yours

Mark Mandell - Gone Round In New Jersey

Sounds like a leaking out-put valve in your pump . Effect is to bleed back air during the intake stroke. Pump has to work far longer the pressurize the receiver. If it's the pump you've got 2 options: 1) rebuild the pump (or get a rebuilt pump unit) or 2) Go shopping for a new compressor.

Other possibility is a stuck/fouled unloader valve which depressurizes the pump's output line so the pump doesn't have to start up working against the tank pressure. U-V's are pretty easy to replace. Check your manual for the part number.

Re: compressor (insert bad words here...)

#10

Re: compressor (insert bad words here...)

John Lucas

I'll try typing from iPhone. Mine was a messed up valve. If you turn it passed parrallel with the pipe it starts acting like its shut off It never did that before

Re: compressor (insert bad words here...)

#11

Re:  Yours Thanks Mark

Jorge

The cast iron Campbell Housefeld proudly states "Made in USA" in 4 different locations including the cast iron housing of the cylinder and the storage tank.

The knob that should rotate to raise or lower pressure, is totally frozen, don't budge even with channel lock pliers, and the two pressure gauges, the one connected to the on and off switch was made in Taiwan and the one attached to the air hose fitting was made in China, so both have been replaced at different times and are not the originals. The one connected to the switch reads 120 pounds and the other reads 90. As I bought this unit used a long while ago, I do not have a manual, so I think it is time to take it to a repair shop, unless I can locate a doctor that does home visits...

Cannot even move it weight over 200 pounds!!

Re: compressor (insert bad words here...)

#12

House Calls

Mark Mandell - Gone Round In New Jersey

Will get very expensive (if you could even find one) after the warranty in done.

At only 200 lbs., best load in the truck/trailer and drag it to the shop, unless you'd like to pay them for pick-up and delivery. Add those charges and things may get way too expensive for that old tank of questionable utility. I say that because a) it was already "used" and b) your post indicates that you didn't keep the condensate drained (gunk that blew out) so that will have accelerated rust and corrosion of the tank. Did you change the oil every 6 months? Use synthetic compressor oil? Such tanks only have a number of years of such use before they start to leak, through pin holes and such. I suggest that you do a bit of shopping on the price of a new machine before you commit to putting "X" dollars into your old one. For instance, a replacement 1-stage compressor pump can easily run $350 plus labor, delivery, and tax. Make sure you want to put that kind of coin into an old machine when $700 will get you all new and warranteed.

Northern Tools often has good deals on top quality compressors like Ingersol Rand and Quincy, some with free shipping, which are far better than what you'll find with a fancy paint job in a big box joint.

Re: compressor (insert bad words here...)

#13

Sounds Like . . [two words]

Mark Mandell - Gone Round In New Jersey

new valve

Re: compressor (insert bad words here...)

#14

Thank you oh Sage!

Jorge

Your advice is well taken Mark, you are right.

I'll try the new valve first...

That compressor, like myself, works in a non heated space, so most of the winter It does not work, I do without because condensation will freeze.

Yes I am good at changing oil and I use synthetic oil. I don't drain after every use, but I did add a bleeder valve that collects some of the condensation, that I use frequently and once a week I drain the tank. I knew it was rusted when I got it...

You get what you paid for...

Re: compressor (insert bad words here...)

#15

Re: Sage

Mark Mandell - Gone Round In New Jersey

and a little Parsley and Thyme ;)

That compressor, like myself, works in a non heated space, so most of the winter It does not work,

You should then drain it and leave it open during that period. Note, however, that there will be much less water vapor in the air to condense in the tank during the winter. My biggest problem in winter is that my compressor is located in the unheated garage. Takes more juice to get the cold pump started. I also put a "T" and manual valve in the drain line so that I can bypass the auto unit.

Also, you should consider an automatic condensate drain like the one that McMaster-Carr sells for about $60. When fitted to the tank drain, it will open for a few seconds to blow out condensate each cycle when the pressure drops by 10-15 psi. You need to check, clean, and lube it with synthetic grease at least once a year.

Keeping your tank's interior dry will extend the life of the pressure-trol, valves, regulator, and your air tools many times over.

Re: compressor (insert bad words here...)

#16

Re: Sage

Jorge

Mark

You are giving me an education in compressors, much appreciated.

I'll look into giving it a draining valve, it does not have one, just a plug at the bottom of the tank.

Yes in the winter I don't use the compressor or the vacuum pump, both just trip the breakers. So all I do is rough out things, The dust collector browns out the lights at starting and then it is OK. so I do some sanding, not frequently.

Hollow forms, where I really need the compressed air, have to wait until spring and same with platters, as I make them out of bone dry blanks.

Maybe this is my cue to kiss this unit good by and get a big one with enough reservoir to run an air sanding turbine. I don't like sanding at all, and those turbines work very fast and leave a nice surface.

Re: compressor (insert bad words here...)

#17

Bigger Ain't Always Better

Mark Mandell - Gone Round In New Jersey

Jorge,

If you're going for "big air" 12 to 20 cfm, you'll be looking at 3-5 hp motors and some serious 10 to 8 gauge wire on 25 to 40 amp dedicated circuit to handle the start phase. That'll be burning major electrons just to run a little sander. Unless you have free power, I suggest you think twice about that much air.

I have a 3hp 60gal I-R single stage compressor that gives me 11 cfm that is all I really need to take care of turning and light carving in the shop, car stuff in the garage, and hvlp spray finishing both furniture and turnings.

Re: compressor (insert bad words here...)

#18

While I'm At It *LINK*

Mark Mandell - Gone Round In New Jersey

The McMaster drain that I have is their part 4919k13. I just checked, however, and the price is up to $82. Still cheap for an auto condensate drain.


auto drain

Re: compressor (insert bad words here...)

#19

Re: Sounds Like . . [two words]

bill Crommett

Gloat, gloat ! My compressor is a five gallon thing I bought used, from sears about thirty years ago.

I presumed it was near the end of it's life fifteen years ago so I bought a new oilless compressor that was so miserably loud that I moved to the barn for tires and such and brought the old one into the shop for as long as it would last. Well, it has lasted and lasted and it sounds like the piston is jumping out of its hole every so often to see what new is going on in the shop, but it still compresses. Thanks for the reminder to drain the condensate. I haven't don the annual drain yet this year and I don't look forward to the gunk-ee job, which is only half as bad as getting up off the floor afterwards.

Re: compressor (insert bad words here...)

#20

Gracias!


Re: compressor (insert bad words here...)

#21

Nada 


Re: compressor (insert bad words here...)

#22

this has got...

ihmserv

to be the worst week for compressors.

first my small shop compressor blows a seal and seizes up... today my work compressor decided it didn't like the regulator any more and started pissing out more air than the motor could keep up with.

IAN