Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

Making your own lathe

Posts

Re: Making your own lathe

#2

Alan Zenreich

Re: Making your own lathe

Alan Zenreich

Very nice, and it's variable speed!

Re: Making your own lathe

#3

That was good.........

jake Niedling

I really liked all the sounds of his hand tools. Made me smile this morning. Thanks for share the find.

Re: Making your own lathe

#4

Re: Making your own lathe

John Lucas

Love his handtool skills. Did you notice all the workout equipment and bicycles in the shop. I'm sure he and I would get along well. We'll have to teach him how to use bevel rubbing tools on that lathe. He obviously understands how they work on the flat work.

I'm still wondering why he made that lathe have a swing of about 20 to 24" when he won't have the horsepower to move that big of a piece.

Also was that a purple heart brace he put in there. Wow I would have used something less expensive for that part.

Normally I hate music along with videos. It usually is obnoxious and poorly chosen. His choice was perfect.

what an enjoyable video. Thanks for posting.

Re: Making your own lathe

#5

Yours don't sound like that.   


Re: Making your own lathe

#6

Rob Wallace

Re: Making your own lathe

Rob Wallace

You can't go wrong with the music of Scott Joplin with such a fast-paced video.

He is not only showing us his woodworking skills.....

.....he is also "The Entertainer".

This will be our on-line "Video of the Month" in our upcoming woodturners newsletter...!!

Thanks for posting!

Rob

Re: Making your own lathe

#7

Thanks, very interesting/entertaining


Re: Making your own lathe

#8

Re: Making your own lathe

Craig Daymon

Very entertaining and I really like (want) his drill press.

But I am a bit disappointed to see that in order to build a treadle lathe, I first have to have a lathe that I can take apart for key components.

Roy Underhill had a great episode of, "The Woodwright's Shop", where he built a treadle lathe from discarded 2x material from bunk beds being trashed at his daughter's college. There was a Popular Woodworking article that added to the episode.

That skew chisel might even make Allan Lacer jealous.

-Craig

Re: Making your own lathe

#9

Brad Vietje

Re: Making your own lathe

Brad Vietje

Fantastic! Really fun watching and all those little taps and saw cuts really make it rise above the other time lapse vid's I've seen. Have to go back and watch some of his other stuff.

I agree with John on all points -- a little spindle gouge training, and he'll be good to go!

I also wondered why he was building the swing so large, instead of a smaller swing and a taller stand (?)

Since the whole thing is scrap wood, the Purpleheart does seem a little over the top, but he may have gotten that from a pallet made overseas.

Great video!

Safe spinning,

Brad Vietje

Newbury, VT (mired in taxes... >( , so I really needed the break!)

Re: Making your own lathe

#10

Re: Making your own lathe

Sergio

Excellent video. It is not so uncommon to see american period bowls made from ash burls which have a diameter in the ramge of 22 or more inches. Now those burls are practically nonexistent but three hundreed years ago they must have been common in the uncontaminated north east forests.

Anybody can buy one of those period bowls. A few weeks ago an ash burl, 23 inch in diameter, do not remember the hight, was auctioned for more than $20,000.

Those bowls were turned by pedal or pole lathe.

Inertia and momentum are a big help plus sharp high carbon tools and a "little" skill.

Re: Making your own lathe

#11

Steven Antonucci

A-K (aka... Big Slick) not a skew


Re: Making your own lathe

#12

Dick Hines

Re: Making your own lathe

Dick Hines

One of the members for the Richmond Woodturners built a wooden foot powered lathe and use a sprocket from a 10 speed bike. He had it at the Va Symposium in 2008.

It was in the lobby. Maybe some of you may have seen it.

Re: Making your own lathe

#13

Rob Wallace

Re: Making your own lathe

Rob Wallace

Dick:

I saw that lathe in the registration area at the Richmond symposium, and actually played on it for a bit. Neat idea and very well constructed.

Rob