Challange for John Lucas *LINK*
Stuart Johnson
John you like to turn small things and have a metal lathe. Here is something you can practice making to develop your skills.
Tiny engine
Knowledge You Can Build On — Est. 1998
Challange for John Lucas *LINK*
Stuart Johnson
John you like to turn small things and have a metal lathe. Here is something you can practice making to develop your skills.
Tiny engine
In my dreams- I'm still shooting for +/- .003"
Re: In my dreams- I'm still shooting for +/- .003"
Galen Vetterick
I noticed he put the heads on without any kind of gasket or sealant so must be polished dead flat surfaces. All that work and even on air it needs lubrication and I see none, spray can?
I talked some time with a gentleman that made about the same size engine, but V8, that acutally ran on nitro fuel but also had a sump type oil system. Made his own spark plugs as well. He did have to have a small motorcycle battery to start and provide basis for spark.
I've seen a radial aircraft engine in this size but the guy bought it from an estate and did not build.
I still have the castings for a Stuart 10V live steam engine that I never built since I had sold my metal lathe. Need to find a good home for it whoever has the time and machines to finish the parts.
Too many hobbies over the years.
Re: In my dreams- I'm still shooting for +/- .003"
Dick Hines
Now I want to see what he builds to install it in.
Way Too Big For John...
Brad Vietje
... he'd try to make the whole thing out of one of those little screws
!
Safe spinning,
Brad Vietje
Newbury, VT