Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

mesquite

Posts

mesquite

#1

mesquite

Mark Motquin

I just acquired a load of green mesquite in various sizes, living in Wisconsin it's a wood we don't see much of. If anyone could give me any info on it, I would appreciate it, such as, how to store it, how to dry it after turning, anything would help. Thank You in advance. Mark

Re: mesquite

#2

Ellis Walentine

Wonderful wood

Ellis Walentine

Mesquite is a great turning wood (IMO) because it doesn't distort (at least not much) as it dries. It is very hard, though, and is somewhat challenging, even when green, although it is really wonderful in that the chips are never stringy, at least in my experience. I try to include some sapwood in the finished piece, as the color contrast is beautiful (in the eye of the beholder).

Ellis

Re: mesquite

#3

Mike Stafford

Re: mesquite

Mike Stafford

One of my absolute favorite turning woods. It could be the best turning wood there is.

It is very stable and can be turned green to a finished product. It responds well to sharp tools and can have some silica in it.

Can't wait to see what you do with it. I wish I had all I wanted to turn.

Re: mesquite

#4

Agree with all of the above and.....

Barry Irby

Save the off cuts ad shavings for smoking meat. If you don't smoke stuff yourself, you can makes friends by saving the bits and pieces for them.

Re: mesquite

#5

Re: Agree with all of the above and.....

Paul Vechart

Mark if you need a place to store some of that wood I also live in Wisconsin and would be happy to house some of it for you! How did you come across this wood if you don't mind me asking?

Re: mesquite

#6

Re: Agree with all of the above and.....

Sam Scalzo

Mark,I live in Arizona and get all the Mesquite I want. It is one of my favorite woods to turn. I seal the green wood and turn it in about 6months. Here in Arizona our moisture content is only about 15%,so it

dosn't take long to dry. SAM

Re: mesquite

#7

George Taylor

I can't argue with much that has been said...

George Taylor

... other than keep your tools sharp.

Enjoy



Re: mesquite

#8

Re: I can't argue with much that has been said...

Darrin Hill

i just got some texas ebony... i think its related to mesquite, but MUCH harder and darker...

Re: mesquite

#9

Re: Agree with all of the above and.....

Mark Motquin

Thanks guys for your help, I have family in Texas that knows a rancher, and they were kind enough to let me take as much as I wanted.

Re: mesquite

#10

Texas Ebony..

Steve Kniffen

TX Ebony and mesquite aren't related, but are equally beautiful. TX Ebony heartwood is almost a dark chocolate brown and the sapwood is cream colored. Turns great and finishes smooth as glass. It is hard though. I hoard this and use only for special projects.

Re: mesquite

#11

Re: mesquite

john wood

Mark,

I think everyone has given you all you need to know about Mesquite. Turn it green to finished and admire the beautiful wood. It is probably a favorite among Texas turners where we have access to a lot of it.

Good luck with some beautiful wood.

Re: mesquite

#12

Re: mesquite

Mark Motquin

What's the best finish for mesquite, and how long should you wait to finish if you turn down to finish turn?

Re: mesquite

#13

Re: mesquite

john wood

Mark,

Mesquite responds well to lacquer, wipe on polyurethane, oil, or even wax. I use lacquer most of the time, just because I like it, but Danish oil finishes do very well. By the time you finish turning and sanding, the wood is usually ready to finish: I usually wait a day or two, but that may not be needed.

Re: mesquite

#14

Re: mesquite

Craig Daymon

I've never turned any, but always liked the color of the pieces I've seen.

The thing I find most interesting about Mesquite is that when they cut down the tree, it will sprout up from the stump and continue to grow. (At least that's what I've heard.)

-Craig