At an estate sale, for about $25, for five tools, in the box, never been sharpened. The were bought from Woodworkers Supply for $82, in 2003, and don't appear to have ever been taken out of the box, and never met a grinder.
Should I keep them this way, and protect their vintage edge? he he
You should carefully replace them in the box you got and ship them to me. As you are likely aware, they are pre-carbide era HSS, which only has a shelf life of about 5 years before causing serious injury.
I have a safe storage locker that they can be held indefinitely. Too bad about your $25...
According to the "experts" on Antiques roadshow. If you sharpen them it will drastically reduce their value on the open market. There seem to be some fingerprints and drool on them but fortunately they can be professionally restored to the pristine condition that collectors want. At auction they will probably bring between $1200 and $1500. More if there is a letter with them saying what turner was dumb enough to never use them.
I'd drive to Nashville to get your fingerprints on them for that. But then,,,,,,,,,, one or both of us would probably need to get discovered, then die before it would bring someone else the big bucks.
I think I'll give them a good working over, and give them a try on some wood. All the corners are almost as sharp as the blades, except for the one gouge.
... and wrapping must remain in "like new" condition to assure the value for a collector. Of course this means you should never unwrap or sharpen them, let alone touch them to some dirty sappy ol' wood!