Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

Rough out storage question

Posts

Rough out storage question

#1

Steve Kubien

Rough out storage question

Steve Kubien

Hey kids,

I've got a storage problem. I have very limited storage for roughed and sealed bowls indoors. I'm thinking of using a couple of shipping pallets to create something of crate. The floor would keep them off the the ground, the sides would allow for ventilation and I would use a tarp to protect from direct sunlight and the elements.

Is this a remotely good idea or am I going to wind up with a load of decorative firewood? This will largely be for bowls and I live in southern Ontario, just outside of Toronto.

Thanks!

Re: Rough out storage question

#2

Re: Rough out storage question

John Lucas

Steve My experience with storing wood on wood that is supported off the ground is that it's only slightly better than laying it on the ground. The bugs got to all my wood but it did take a little bit longer.

Re: Rough out storage question

#3

Steve Kubien

Re: Rough out storage question

Steve Kubien

Thanks John. I wonder how high off the ground I would have to get? Maybe I just need to build some kinda rack in my apartment.?

Re: Rough out storage question

#4

Finish 'em and  sell 'em.  No storage issues

Greg Haugen

Just turn more Steve. :-)

Re: Rough out storage question

#5

Maybe it's time for a tree house 


Re: Rough out storage question

#6

Steven Antonucci

I have a three step process

steven antonucci

1. Logs on the ground, get to them as fast as I can... cut ends away until I am past checking. Rough turn.

2.) Brown paper bags, indoors. If they made it this far, I am in pretty good shape. I use lawn litter bags. They hold a lot of bowls, and only take a 18"x18" footprint.

3.) After a couple of months, I pull them out of bags and they go on shelves so I can match them to see what I have and make what I need to complete a set. It's pretty easy to forget what you did 2 months ago. This is also inside the shop on a deadspace on the wall. If I ever threw anything out, I'd have more space than I needed... but I'm here now...

Re: Rough out storage question

#7

Steve Kubien

Re: Finish 'em and  sell 'em.  No storage issues

Steve Kubien

You're not wrong Greg. I've been doing a lot of that lately but I've come into so much fresh, big timber (ash, walnut & cherry) that I will have too many rough outs to store in my usual fashion. My capacity is increasing so I need to make a few upgrades.

Re: Rough out storage question

#8

Steve Kubien

Re: I have a three step process

Steve Kubien

Do you anchorseal them prior to bagging? My experience without sealing is less than favourable.

Re: Rough out storage question

#9

That's always a good problem to have. :-)


Re: Rough out storage question

#10

Steven Antonucci

No seal, nothing

steven antonucci

I seal the logs on the ends if I am hoarding and I know that I can't turn it all before end checking, but that is it. Paper bag cherry and apple- lost 1 out of 80 bowls with this method from Hurricane Sandy to now. I leave logs long to keep the middles wet, and rough down to about 10% (estimated, not measured)

Bags get added to until full. I suspect this keeps up the humidity, but also not measured. Coring, so I restack the bowls before storing to maximize use of the space. No pith. Ever. Most bowls are foot on the outside of the log, rim in the middle.

When you make that many bowls, it is OK to lose one here or there...

Not to mention that it is one less that you don't need to finish.

Steve

Re: Rough out storage question

#11

Dick Hines

Re: No seal, nothing

Dick Hines

I rough turn most all my bowls. Then soak them in denatured alcohol over night. Then wrap the outside of the bowl in brown construction paper. Then they are piled on the concrete shop floor for a couple of months or until I can get to them. I don't seal any of them.

Re: Rough out storage question

#12

I Wax 'em...

Wally Dickerman

We all seem to have our own way of doing things. I rough turn pieces then slather them in Johnsons Paste wax. If the piece is very wet or is a wood that's prone to cracking I brown bag it for a month or so. Then they all end up on a shelf in my shop. Right now there are 40 or 50 rough turned pieces on my shelf. Not one is cracked. Oh, and I live in hot dry Arizona....been using the paste wax for a lot of years with great success.

Re: Rough out storage question

#13

Steven Antonucci

DNA and Wax

steven antonucci

If I need a bowl faster than couple of months, I will do what Dick suggested with DNA. I can rough out a bowl on the first of the month, and finish it before the end of the month using DNA.

During the summer, I am more likely to wax a bowl because of the faster evaporation from the hotter temps. If I lived in the desert, I would wax them using AnchorSeal- not because it works better than Johnsons, but because it smells better! The solvents in that would make me loopy if I had 15 bowls all letting off solvent in the shop at the same time (an average roughout day for me)

DNA bowls do not warp anywhere near as much as non DNA bowls. DNA bowls can be less than 10% and because they are thinner, they dry faster. I've had some done in as little as two weeks.

For me, doing nothing costs nothing...and is the least effort, so I take the path of least resistance. I burn the ones that don't make it, so nothing goes to waste.

Steve

Re: Rough out storage question

#14

Re: DNA and Wax

Don in Central Illinois

Where do you purchase DNA? I've seen it at Ace, etc but seems awfully expensivd, like $20 a gallon. I would think I need 3 - 4 gallons for some of my bowls.

Re: Rough out storage question

#15

Re: Finish 'em and  sell 'em.  No storage issues

Steve Mushinski

Hey if you have too much fresh wood maybe we need to do some horse trading!

Re: Rough out storage question

#16

Steven Antonucci

that is the stuff...

steven antonucci

I think I paid $14/gal last time I bought it? You get a lot of bowls out of it, assuming you don't back your truck over the 5 gal bucket first.

I probably had 3 gal in at the time I did, and it was probably 50% water. Guessing I ran 25 bowls through it? Gotta sell a bowl here or there to get your money back out.

Steve

Re: Rough out storage question

#17

Re: I have a three step process

Mark ravensdale

Steve has pretty much the same process as me for drying only I use brown paper (our stores in the UK tend to use plastic bags not the brown bags like in the USA)

I would be pretty hesitant about putting my roughed out bowls outside, those bugs will get at them for sure, I have very limited space, but it's amazing just how many roughed out bowls you can fit into a small place if you use your head, and once you get the cycle going its not too bad (finish a dry one then rough out another and so on !)

I do store some of my wet wood outside to air dry on pallets though, I put one pallet on top of the other (so the wood is around 10-12 inches off the ground in a nice shady place behind my shop that still has good air flow/movement and then cover with a Tarpaulin leaving the ends open, this has worked well for the last 9 years or so, even with woods like beech (which is not known for drying well without splits and/or end shakes

Re: Rough out storage question

#18

Re: DNA and Wax

Mike Gould

I purchase my DNA as needed in 5 gallon jugs at a Aubuchon Hardware Store near me. (Cape Cod, Ma)

It is a special order for the store.

Last time (about a year ago) it was $35.00 for the jug.

Took about a week to get it in stock.

---Mike---

Re: Rough out storage question

#19

Steve Kubien

Dude, gas up your saw!

Steve Kubien

I think I can set us both up for quite a while. I'll email you tomorrow.