Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

Not too far OT

Posts

Not too far OT

#1

Not too far OT

bill Crommett

Can anyone tell me what the controlling factor is that makes an epoxy either a five minute product or a thirty minute set. Is it a difference in the resin or is the difference in the hardener ? The reason for the question is that I seem to end up with 25% of the hardener left in the tube, both in the five minute stuff and the thirty minute stuff. So, what would happen if I used the five minute hardener on thirty minute resin ? And vise-verse ? Yes, I know that the instructions say "equal parts", but that is the least of my failures.

Re: Not too far OT

#2

Good question!!


Re: Not too far OT

#3

Re: Not too far OT

John Lucas

In the West System epoxy the epoxy stays the same and you change the hardener. Sounds like a simple test is in order.

Re: Not too far OT

#4

Re: Not too far OT

Jim Breeden

I've had the same problem so, I started to use a little more hardner than equal parts, now they come out about even. The only thing I've found is, the epoxy sets a bit faster.

Re: Not too far OT

#5

Re: Not too far OT

carl civitella

I think it is because the risen flows a little faster then the hardener. It seems, not on purpose, but you squeeze out more resin.

Re: Not too far OT

#6

Re: Not too far OT

Mike Foster

I'm not positive I know the answer as you would need to look up the MSDS or contact the manufacturer to be sure. I have some 5 minute epoxy, and some that takes on the order of hours to a day. I know that they use chemical accelerators for the 5 minute variety which have sulfur in it (which is what makes it smell). You might be able to mix the accelerators, but I would contact the manufacturer to be sure. I have called both West system and System 3 folks and they are extremely helpful.

BTW the 5 minute variety is not viewed as durable and archival as the regular resins.