Saw this on TV tonight
steven antonucci
Thought about getting a couple for the shop:
I could see them being useful as spot lighting around the lathe. Maybe I could find the chuck screw I dropped too?
Steve
Knowledge You Can Build On — Est. 1998
Saw this on TV tonight
steven antonucci
Thought about getting a couple for the shop:
I could see them being useful as spot lighting around the lathe. Maybe I could find the chuck screw I dropped too?
Steve
Re: Saw this on TV tonight
Steve Mushinski
Been using a version of these for two years now Steve. The magnets are very strong and sometimes too strong. Mostly used at work but I do have one at home also.
Best use for me is when working in electrical panels. Stuck to the side I can then point the light where I need it to get the job done.
Re: Saw this on TV tonight
Mike Stafford
Light is always a good thing in this hobby but for lost screws I say go magnetic young man.
I made a long handled telescoping magnet for the shop so I can find those screws that when dropped end up under the workbench on the other side of the shop in my neighbor's garage..... 
Did you watch the video?
steven antonucci
It's a flashlight.
It's a telescoping head.
It's got magnets.
It's $14.95+S&H, but if you act now, we'll throw in a second one for free. Just pay processing... (ok, not free...)
If you figure that they average $10, give or take, they might be handier than those Ikea lights everyone was buying. No need to be near an outlet, and they'll work in your car. LEDs throw enough light for turning, and you can mount them to your headstock unless you are Robin Wood.
Steve
Re: Did you watch the video?
Alan Zenreich
Steve,
It doesn't appear that this light is in the same class as the Ikea lights.
This one won't be nearly as bright (it's using 3 small low power leds instead of a single high power LED that the Ikea light uses)
Also, one of the things that impressed me about the Ikea lights was the color of the light... very neutral. The very inexpensive LEDs used in cheap flashlights (and some items targeted at woodturners) have an awful green or blue cast to them.
So yes, this tool/toy may have its uses, I very much prefer a good flashlight and a magnetic telescoping pickup.
Life's too short to use crappy flashlights
Re: Saw this on TV tonight
Dick Hines
Now if someone could come up with something that would help me find my wedding band. I had a friend come by today this his metal detector today. We went through the four bags of chip I had collected but no luck. I guess i will order a new one tomorrow.
Re: Did you watch the video?
Steve Mushinski
Not anywhere near as good as the ikea light. As has been said it has its uses but not a replacement for good lighting at the lathe.
Re: Saw this on TV tonight
Steve Kniffen
Saw these on Cool Tools a couple of years ago. Bought one for me and one for each of my two sons. Then I had to get one for my wife's quilting room and my sister-in-law the nurse. Each of us has a different use for them. I keep mine at my workbench where it's very handy to pick up dropped pen pieces. The light really helps. It's not bright enough to light up my lathe. I have a work light bar (halogen) for that. You can land aircraft by it. These are great though. Steve
I bought 2 of these *LINK*
John Lucas
I thought they would be the cats Meow for turning and other tasks. I never use them now. They just aren't bright enough. I shouldn't say never because every now and then you need light somewhere where it's hard to place a light. Since you can bend the light and put the head 2" from the cut, then it's bright enough to be of help. They have been handy occsionally when working on the car.
http://www.bing.com/shopping/designers-edge-24-led-barbecue-light-model-l-872/p/C1BCDDE7CBC528E759C7?q=barbecue+light&lpf=0&lpq=barbecue%2blight&FORM=CMSMEE
Re: Saw this on TV tonight
phillip medghalchi
these guys sure got a free ride for the advertisement here, W/O paying a dime for it. we need to ask Ellis to charge them for us endorsing them here. I have both Ikea and this one and at the lathe I have the woodcraft light which was $69, but since I won this one and the Ikea one in our local club meeting drawing it doesn't matter. My favorite is still the Ikea one. it has a nice glow to it
We need to ask Ikea for special discount that we talk about them so much.
