Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

Big pieces of African Blackwood

Posts

Big pieces of African Blackwood

#1

Big pieces of African Blackwood

Craig Daymon

I was looking at the wood candy store today (Gilmer Wood new arrivals) and there are a number of large African Blackwood boards. Thought I'd mention it here if anyone is interested. Some are over 80" long and some over 3" thick. Just in case someone had an interest in turning a bowl or (small) platter from the stuff. Also might supply you with all the finial stock you'll ever need.

Gilmer Wood New Arrivals

https://www.gilmerwood.com/items_new.php?page=&keywords=Search&size=100

Re: Big pieces of African Blackwood

#2

Steven Antonucci

Blackwood=Rosewood=Death


Re: Big pieces of African Blackwood

#3

Rob Wallace

Where does the line for new mortgages form?


Re: Big pieces of African Blackwood

#4

Rob Wallace

REALLY?? (Re: Blackwood=Rosewood=Death)

Rob Wallace

Blackwood (Dalbergia melanoxylon) is a true rosewood, but in my experience it is not nearly as bad in dermakl irritation as Cocobolo (Dalbergia retusa). I have been turning this wood species for over 10 years without incident.

I have made dozens of finials out of blackwood, taking usual precautions, and have not experienced any problems.

In contrast I have had mild cases of dermal irritation with cocobolo; the concentration of dalbergine is likely higher in some species than it is in others. Kingwood, for example, is really not that much of a problem.

In no way would I equate African Blackwood with death - it is among the most desirable woods of instrument makers (e.g. clarinets, oboes, bassoons, flutes, etc), those chasing threads, and many, many ornamental turners. It does not deserve a bad reputation just because it's one of the Dabergia species.

How much experience do you have turning it, and why do you think it is "deadly"???

Rob

Re: Big pieces of African Blackwood

#5

Steven Antonucci

Re: REALLY?? (Re: Blackwood=Rosewood=Death)

steven antonucci


This is a picture of the reaction I had the last time I turned African blackwood. The reaction was so severe that I gave away the rest of it. I was turning a 1" finger top when this ocurred.

Death.

Steve

Re: Big pieces of African Blackwood

#6

Re: Big pieces of African Blackwood

steve worcester

Ant Rosewood is a matter of what kind of reaction do I have now vs latter. I can't contact Cocobollo but any other I don't have a problem.

Some will see it, some won't. Some will see it eventually, others not. Like a lot of woods, some are tolerant, others not.

Does that cover it?

Re: Big pieces of African Blackwood

#7

Your statement seems a bit overblown

Craig Daymon

Though your eyes were closed, I don't get the impression you died.

Certainly any wood from the dalbergia family should be turned with caution. Cocobola being the most notorious that I'm aware of. Personally, I always wear a dust mask when turning one of them. Can't say I've had any skin irritation yet.

That being said, there are any number of woods to wary of. I turned some Beech for the first time several months ago and got a severe nose bleed. (Didn't wear the dust mask.) There is one form of lacewood (the Australian one, I think) that is related to poison ivy. I'd like to avoid that as I get an allergic reaction to poison ivy.

The list is pretty long. Anyone doing woodworking/woodturning should try to be aware of possible effects of any wood they are using and take precautions.

I do know it is a very bad idea to allow rosewoods to be used during demos. You can take precautions on your own, but when working in front of a large group, it is much harder to protect everyone that might be exposed. Same should be said for other problematic woods, but rosewoods are the ones most discussed.

Re: Big pieces of African Blackwood

#8

Steven Antonucci

A recap of my experience

steven antonucci

Rosewoods are notorious for being sensitizing. I am sorry that the picture of the immediate dermatitis around my eye wasn't compelling enough for you, but it's pretty hard to take a picture of the pain and respiratory issues that accompanied that eye.

Here is a better picture of the eye. If you look closely, it looks like I skinned my eyelid in a fall. The skin actually flaked off. This picture was probably taken within 15 minutes of turning, and likely happened because I rubbed fine dust by my eye. I have a pretty high tolerance for pain, but this was excruciating. I took a shower and an antihistamine to try to alleviate the effect and difficulty that I had breathing, and thankfully, it help restore my normal respiratory functions. Didn't do squat for the inflamation and dermatitis, though.

I'd advise you to buy that board and then run it through your jointer and planer a couple of times. Perhaps that will change your opinion?

Steve

Re: Big pieces of African Blackwood

#9

Maybe, maybe not. ;-))


Re: Big pieces of African Blackwood

#10

It's a matter of being aware of the risks *LINK*

Craig Daymon

Many of the members of the Bucks County AAW group that I belonged to when I was in PA would state that if you weren't sensitive to dalbergia, you will be. That being said, many of those same members continue to turn and use rosewood by taking precautions. Many also keep an epi pen in the shop.

The fact of the matter is there are inherent risks with working with wood. The metal dust from sharpening is quite hazardous, but I'll bet there are few turners that bother to wear a dust mask when sharpening. Acetone, Mineral Spirits, Ammonia? Heavy metals in finishes. Working with aluminum dust to fill voids.

Like I already stated, I have found I have a sensitivity to Beech. It didn't stop me from finishing the turning. You also can't grasp just how sensitive I am to poison ivy, therefore that Australian lacewood is something I have to be very careful of. Inhalation of some of that dust (very possible even with a dust mask and dust collection) could pose a serious problem.

This weekend I will be using a propane torch to burn the inside of a hollowform. Precautions must be taken and it is not something I'll be doing in the shop.

I'm sure you're also aware that there are sharp edges on the tools you use. As illogical as it sounds, your sharp tools are safer for turning than dull ones, but that doesn't mean that your likely to never get a cut. (I think someone here mentioned getting a skew in the foot about a month back.)

Let's not forget spalted wood of any variety. Those very safe maples are frequently spalted and spalting is caused by a fungus and even when the wood is dry, the spores are simply dormant. NOT dead. Breathe in that dust and you are opening yourself up to some very serious risks. Remember that mushrooms and toadstools are fungi and many are toxic.

I've put a link to the Wood Database below. It pays to try and learn about the woods you are using, especially the risks, but also movement, workability, finishing, color change with age and light, and gluability. (Not sure about the spelling of that last word.) You might be surprised how many woods have some level of sensitivity associated with them.

I'm not convinced the database is the holy grail of wood info, but it is a great first step.

Sorry to drone on, but it's just that there are a lot of risks associated with this hobby, many of which are largely ignored. There are also people that have worked with any of these risks without issue. That being said, it does not mean we should ignore the risks. Many of those risks are associated with long term impacts and not ones so immediate as those associated with rosewoods.

-Craig


Wood Database - Check risks before turning

Re: Big pieces of African Blackwood

#11

Re: It's a matter of being aware of the risks *LINK*

Peter Hyde

Spalted wood carries no risk at all to a person with a healthy immune system Every breath you take carries millions of the same spores into your lungs so we would all be dead if this was such a danger. Check out Sara Robinson of Northern Spalting


http://www.northernspalting.com/

Re: Big pieces of African Blackwood

#12

Re: Your statement seems a bit overblown

Mark ravensdale

Personally I wear a positive pressure mask when turning all dry woods, better safe than sorry, but I also must say I have never had a problem with African Blackwood (and yes I work it a lot)

It's not whether I will have a bad reaction to it that bothers me, it's the damage it can do to your alveoli that bothers me (take a look at most wood dust under a microscope and you will see why, it looks like tiny shards of broken glass, nasty!!!)

Re: Big pieces of African Blackwood

#13

Re: Your statement seems a bit overblown

Barry

I get a skin reaction when I turn Cocobolo, actually, when I turn any of the Dalhbergia family of woods. Kingwood is not as bad. I had a rather bad reaction to Cocobolo once, requiring a trip to my doctor for a cortisone shot. I have since learned a few precautions to take. I turn only during cooler weather. (When it's hot and you sweat, the shavings stick to your moist skin and the reaction is more intense). I try to wear long sleeves and a dust mask. I also try to turn this wood just before quitting work for the day. Then, I go directly to the house and take a tepid shower with lots of soap and water. By taking these simple precautions, I have been able to avoid any further trips to my doctor. What little rection I do get responds quite well to OTC Cortisone 10 cream. My doctor didn't call it an allergic reaction, but rather a contact dermatitis. A full-blown antiphylactic (allergic) reaction with airway restriction can be fatal.