I am wanting a faceplate for a nova.. it's the one that comes with the lathe...
i found them on amazon cheaper than everywhere else, of course...
but i want to know is it made by nova (they dont tell)...
because i dont want to buy something made by another company... i dont want to kill myself cause i bought something online made by another company that makes inferior hence it can explode product.. i.e... is it inferior or is it the same?
I think your dedication to Teknatool/Nova is admirable, but I'm wondering why you would not want a high quality faceplate from another maker?
I understand not wanting a junky Chinese-made piece of garbage made from melted down who-knows-what, but there are a number of manufacturers that make very fine equipment that will present no problems. I like Teknatool products a lot, and own an older Nova Comet mini, and a Supernova with almost all the jaw sets, and I purchased a Nova 3000 with outboard tool rest and a 3-Ph variable speed motor upgrade for a local club; I can assure you that Teknatool is a very good company.
The risk comes in buying from a dot-com internet company, where you can often get great deals, but you can occasionally get screwed (as the sellers could be almost anyone from almost anywhere), versus buying from a reputable company like Packard, Craft Supplies, Lee Valley, Hartville, PSI, etc... These companies are run by real people who know their products and care about the wood turning community. Amazon is run by ...??? who, exactly??? When you call Packard, you might very well speak to Brad or Debbie Packard, who own the company, and they know the tools they sell and even use them, and often they know the actual person who manufactures them.
If you have a Nova DVR, or Nova 3000 (now called the 1624 or 1624-44), any high-quality 1.25" faceplate will work fine. If you have a mini, you'd look for the 1"x8 sizes. You might consider those made by Oneway, Powermatic, Robust, General, Easy Wood Tools, Best Wood Tools, and a few others. You may like the features of one model better or worse than another, so it's good to compare. They can be cast iron, cast steel, stainless steel, or anodized aluminum.
If you are looking for this one from Teknatool: http://www.teknatool.com/products/Lathe_Accessories/Faceplates/face.htm, I would have to agree with Greg that 6 or 8 holes would be better than 4. (I could not follow the link Greg provided.) Some makers include a locking "grub" screw to make sure the faceplate (or chuck) won't come spinning off if you reverse the spindle direction -- this is very a good feature to look for!
If you have any doubts about buying an inferior product, then I would look to the established and trusted sources in this industry, and not hunt in the jungle of the amazon... that's why we HAVE competent professionals after all, so we can place our trust in people who really know their stuff, who back them up with a money-back guarantee, and take the risk away from our purchases. That often costs a little more -- and it is well worth it.
Even though Amazon is a local company here in Seattle, I don't have an axe to grind here. But...they do go out of their way to make certain you know exactly what you're buying, who is selling it to you, who manufactured it, etc. All you need to do is look carefully on the page and you'll find it all there. If it doesn't say it's made by Teknatool or Nova, it may not be, and it will indicate, usually who manufactured it, what the warranty is, who is shipping it...
Scroll down the page - if it doesn't spell out what you need to know, don't buy it. I've bought through Amazon for years and the only time I've been disappointed is when I didn't take the time to do my own homework to know exactly what I'm buying.
I am an amazon fan. It's so cool being able to order a book or other item in about 30 seconds. They have all my info and there have never been any questions asked on the very few times I've had to return something. Even then it was not their fault, it's just hard to tell about some items from a photo.
Regarding faceplates, there are lots of good ones on the market. I prefer to have more than 4 holes. My friends at Bestwoodtools make a good faceplate.
im extremely wary of crossing companies... i bought nikon lenses cause they were made by nikon... vivitar and sigma lenses were never as good as a nikon lens..
also i dont like aluminum for any tools... i have one that i accidenttaly touched a gouge to and it ground a deep gash in it... won't do that to steel...
I have lots of gouges in my chucks from hitting them with tools. I found out my Thompson tools are harder than my chucks. Faceplates on the other hand are usually much further from the tools than chucks are. I don't know why but we tend to work really close to the chuck jaws. Because we need to hide or cut away the screw holes from a faceplate generally you work further away or even use a glue block so the tools never get close to the faceplate.
I do agree Nikon lenses are sharper but at work I had to use what we had (which fortunately were mostly Nikon). However when I did use the other brands no one knew it but me. All lenses are pretty decent these days.