Spatulas and Spoons (PIC)
kruizen

I did my first demo a couple months ago these are some of the items that I did to prepare. The demo did not go as bad as I imagined that it might.
Questions, Comments and Critics Welcome, Thanks!
Knowledge You Can Build On — Est. 1998
Spatulas and Spoons (PIC)
kruizen

I did my first demo a couple months ago these are some of the items that I did to prepare. The demo did not go as bad as I imagined that it might.
Questions, Comments and Critics Welcome, Thanks!
Re: Spatulas and Spoons (PIC)
Brad Vietje
Looking at these examples, I would expect your demo to be flawless -- just like these items!
Are you turning the outside profiles of the spoons and then cutting them on a bandsaw before using carving methods to hollow them?
Safe spinning,
Brad Vietje
Newbury, VT
Re: Spatulas and Spoons (PIC)
Henry (Raleigh, NC)
Agree with Brad here - those look great!
For someone who has never even thought about attempting one of those - what is the basic process sequence?
(Just rewording Brad questions and comments)
Henry
Thems fancy spoons!
steven antonucci
I have a half dozen or so on my bench now too...
Do you use a hook knife to carve the bowls? Del Stubbs?
Steve
Re: Thems fancy spoons!
Jorge
When I make spoons I use a crooked knife and a curved scraper, it works good on green wood. Not so good on dry.
A scorp would be good for that job.
Wonderful Treen Love them all
Re: Spatulas and Spoons (PIC)
Joe Herrmann
Very nice job--you certainly did prepare and that's why the demo went well. I like a lot of the pieces you have displayed too.
Re: Spatulas and Spoons (PIC)
kruizen
I establish the entire outside shape of the spoon on the lathe. Then carve out the inside with a 3/4" #7 spoon gouge and refine the shape of the back with a pattern maker's rasp and a cabinet scraper
Re: Spatulas and Spoons (PIC)
Don Leydens
These are absolutely gorgeous, all 10,548 of them! Excellent work and congrats on the demo!
Outstanding !
Love the curly maple & contrasting handle
Dick Coers
Beautiful work, and a LOT OF IT!
Beautiful work!
Re: Spatulas and Spoons (PIC)
Lan Brady
Wow, that is great. I have demo'ed turning spoons twice and have 2 more scheduled. I avoided using figured wood becasue I was making a utilitarian piece. After seeing your work, I need to change my thoughts on that process.
Thanks for posting such great work, Lan
thanks - that's helpful
Re: Spatulas and Spoons (PIC)
Mike Rubes, Apex, NC
Good morning,
Wow, those are wonderful! I love the mix of taking a utilitarian piece like a spatula and making it seem like art. I really want to try some of these.
Thanks for the inspiration.
Mike
Apex, NC, at least for a week or so more!
Re: Spatulas and Spoons (PIC)
phillip medghalchi
Those are beautiful works and I'd like to ask that how do you know which one of those exotic woods would be appropriate for utilitarian use? what I am not sure that how they would react to the acid form the salad dressing or other oils and herbs when they come in contact with them and what will happen. how do you secure such concern? or are those non-utilitarian spoons?
No Exotics Here, Sorry for the longwinded response
kruizen
Phillip, the most exotic wood that I have used is Osage Orange and Persimmon that I got in the exotic location of St. Louise Missouri from a supplier that found on Woodfinder when was there for training a couple years ago for work. All of the woods in the picture are local to the Minnesota, Wisconsin and the Upper Peninsula of Michigan area. The nice thing about these projects is that most of the material is from the off cut bin in the shop or from branch wood about 3” in diameter that even most wood turners don’t really want.
I don’t know if anybody else has the same adverse reaction to throwing anything away as me; I hate to call myself CHEAP, maybe frugal is a better word. The two walnut and curly maple spoons are made from a piece of curly maple 2 ¾” wide by 14 ½” long and a piece of walnut that was 2 ¼” x 7” that was on the end of board that had rather large knot in it.
Most of the spatulas just have homemade finish of bee’s wax and mineral oil, some have walnut oil then buffed out then a coat of the bee’s wax and mineral oil. Most of the curly maple utensils have a coat of Watco Oil buffed out and then a coat of the bee’s wax and mineral oil, I have found that the Danish Oil highlights the figured grain better for me.
The picture above is of a spoon and spatula that I use regularly in my kitchen. The spatula is one the first 5 that I made a year and a half ago and has been used to make pasta sauce and been through the dish washer several times. I cleaned it up with a scotch-brite pad and re-buffed this last weekend when I was buffing a couple other projects that I am finishing up. The spoon is the third one that ever made about six months ago also been through the dishwasher several times sander out with scotch-brite pad and coat of bee’s wax. So you can see that they are fairly resilient, the grain definition and the burn lines are little cloudy but still look decent.
Re: No Exotics Here, Sorry for the longwinded resp
phillip medghalchi
Thank you so much for the explanation. If I could only figure out how you did the spoons I'd like to try it out since I can get plenty of my cabinet maker buddy scraps that he just throws them away and it gives me good reason to practice my spindle turning skills. Much appreciated.