Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

Natural edges

Posts

Natural edges

#1

Natural edges

Darrin Hill

I've done natural edged bowls before, using ca to strength etch the bark.

I have someone who wants me to make a lot of natural edged drink coasters and was wondering if I sprayed lacquer on a tree limb and it sliced them on the bandsaw, would the bark hold well? Just think this would use too much ca done individually..

Re: Natural edges

#2

Dennis in Southern Oregon

Re: Natural edges

Dennis in Southern Oregon

Sounds like a quick and easy experiment would answer the question. Let us know the answer.

Dennis

Re: Natural edges

#3

Re: Natural edges

John Lucas

I would be more worried about the wood cracking. To slice wood off horizontally like that leave the wood the most vulnerable to cracking. The limb would have to be very dry. I did dry some dogwood limb slices by placing them in a plastic bag and turning the bag inside out every day for about 2 or 3 months. It works, not a single crack. A fair amount of mold though.

Re: Natural edges

#4

Re: Natural edges

Darrin Hill

It's for a wedding, so they can't expect much, can they?

I mean, how picky can a bride be?

;)

Re: Natural edges

#5

Re: Natural edges

John Lucas

Darrin Cut them up real fast and throw them in the freezer. The bring them out the night before. Maybe that will work and keep them from checking for at least a day or so.

Re: Natural edges

#6

Re: Natural edges

Emmett Manley, Lakeland, TN

Why not just use limbs from trees with tight bark? Bradford pear and persimmon are two woods where the bark hangs on. Persimmon bark is so thick, you can remove most of it and still have a nice natural edge.

Re: Natural edges

#7

Dogwood is good also


Re: Natural edges

#8

Re: Natural edges

Darrin Hill

cause SHE (the bride) wants mesquite...

yes.. my life would be much calmer if i didnt deal with brides...

Re: Natural edges

#9

wedding photographer

John Lucas

I could have made a good living around here as a wedding photographer but didn't like working every weekend, and sure as heck didn't need the stress of dealing with brides, mothers of brides, grandmothers of brides, etc. Heck I eloped when I got married.

Re: Natural edges

#10

Steven Antonucci

Denatured Alcohol?

steven antonucci

Slab them a little thicker than finished. Soak them in DNA.

Let them dry. Finish on a sander. I might suggest epoxy as a finish, because you'll get them dry and flat and they will warp or crack from the moisture in the drink...

Steve

Re: Natural edges

#11

Re: Natural edges

Don in Central Illinois

As a retired wedding photographer, brides can be the best part or the worst part of a wedding. And I have dealt with both.