Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

Thoughts on Pattern

Posts

Thoughts on Pattern

#1

Thoughts on Pattern

Randy gleckler

Was working on a bowl last night and got inspired to do some Wood burning on it. I drew out the pattern I had in my head and went to work. Got done, was pretty happy, cleaned it up a bit then started looking closer at it. Now I can't decide if I'm really happy with it. Sometimes it takes a while for me to decide I like something, but this time I can't decide if I should just clean it off and leave the rim, try something else, or leave this and see if I end up liking it. What are your thoughts on it??! Good or bad, I'm open to all comments, thanks.



Re: Thoughts on Pattern

#2

Steven Antonucci

Maybe not?

steven antonucci

I think that the pattern is well done, but I'm not sure I like it with the knot hole in the rim (breaks the pattern) and it looks a little "thin" in some areas. Perhaps you can thicken some of the lines to fill in some of the dead space in the pattern?

I personally try to stay geometric or repetitive. I think toyve got three or four things here, and they may not all fit together on the same sheet of music.

My opinion only...

Steve

Re: Thoughts on Pattern

#3

Re: Thoughts on Pattern

Dick Coers

"Good or bad, I'm open to all comments, thanks. "

In general, I like the pattern. It's a nice "western cowboy" style that appeals to me. But the execution in general seems weak to me. I think you should have spent more time with layout. Some of the letter style branding touches to other pattern lines, some of them are centered. I prefer heavier dark burns where you colored in the triangles. It can look like texture, or it can look like some burned lines scratched in with a woodburning pen. Not much in the middle.

Re: Thoughts on Pattern

#4

barry rockwell

Re: Thoughts on Pattern

barry rockwell

RandY,

I have no artistic ability at all so this may not mean anything. The outside if the pattern is well defined because the wood stops. If the inside of the pattern was defined by a burn line around the very inside edge of the rim I think it would better define the pattern and the rim from the rest of the piece. Print a picture of it, draw the line, and see what you think.

Re: Thoughts on Pattern

#5

Dennis in Southern Oregon

Re: Thoughts on Pattern

Dennis in Southern Oregon

I was thinking much the same thing. Generally, decorations like this look better if they do not run off the edges of the piece. JMHO

Dennis

Re: Thoughts on Pattern

#6

Re: Thoughts on Pattern

Cynthia Gibson

Hi Randy,

I like your pattern very much! One thing I might do if it was my piece is to fill in the dark triangles completely. You could also go over them with a brown sharpie but be careful. Also, IMHO, defining the edge of the dark triangles might pull your pattern together. I don't think outlining the entire rim would be necessary and that is not easy to do.

C

Re: Thoughts on Pattern

#7

Re: Thoughts on Pattern

Devon Palmer

Really like the Dark Shaded triangles and their texture.