Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

own a Grizzly product?

Posts

own a Grizzly product?

#1

own a Grizzly product?

phillip medghalchi

Get ready for them to give you run around and shrug their shoulder that they will not give your money back on parts even though it's not even 30 days old and it fails. the guy had an attitude that they will not refund my money on the parts I bought Jan 23, 2013 and two days later it failed and the other part failed inn two weeks. he said they would replace it. (again with the same darn thing that was once made in 2006 in Taiwan( so if I give in then I get the same parts again. I have tried to reason with them over a year now and it's not getting anywhere. I am writing to let you all know that if you get this type of treatment then don't be surprised. I researched them through my resources and evidently the guy ho started it had financial problem and someone else bought it, so who knows.

Re: own a Grizzly product?

#2

Re: own a Grizzly product?

Jim Breeden

This is starting to sound a lot like Delta. :\

Re: own a Grizzly product?

#3

Re: own a Grizzly product?

Stuart Johnson

Yes,

8 inch jointer ... no problems.

Dust Collector ... no problems.

14 inch bandsaw ... cracked support and bad upper wheel on delivery. I don't know where in the manufacturing or shipping process it was damaged but Grizzly immediately shipped replacement parts. No problems since.

One issue with the bandsaw is the miter slot is some weird size smaller than a normal 3/4 inch. This doesn't cause a problem but is a pain at times. Over all I'm satisfied with my Grizzly purchases but do feel there is higher quality available but at a higher cost. For example, I purchased a 20" disc sander from Laguana that has given me a lot of fussy problems. The start capacitor burnt out after less than a year. Wasn't covered by warranty and after they shipped me two incorrect replacements (I forget the cost) I got one from Graingers.

Re: own a Grizzly product?

#4

Re: own a Grizzly product?

waltben

14" deluxe band saw for about a year after downsizing from a Mini Max MM20. Only issue I've had was they didn't tell me the riser block kit was back ordered from China before I paid for both. They kept me informed by email during two extensions on when I'd get the kit (total delay was about three months). Guess it wouldn't have mattered as the kit is the same for all of their 14" saws. The saw has been just fine and works better than I thought. Only complaint for me is the lame dust collection port. I'm going to work on that when the weather warms up.

Re: own a Grizzly product?

#5

Re: own a Grizzly product? Yes

Bob Entwisle in NJ

Yes

A couple of them and have gotten good customer service from them so far.

Bob in NJ

Re: own a Grizzly product?

#6

Re: own a Grizzly product?

Terry Quiram

Metal working. Bought a mill and burnt out the motor after 4 months. Called for replacement and was told they were backordered. Seems a lot of folks were burning these up. 6 months later I received a replacement. In the mean time I paid someone to repair it. I filled out their survey after I got the replacement and really blasted them. Stating I would never buy a corded tool from them again and would tell everyone who asked to avoid them like the plague. They called me and said they would make it right for me and would reimburse me the repair cost with something from their catalog. Three weeks later I got a call that said since the mill was now over 1 year old the only thing they could do was send me a hat or t shirt. It was their fault it took so long. I also found out Griz would rewind a motor that is still under warranty. WHY DIDNT THE TECH I TALKED TO 4 TIMES TELL ME THAT!!!!!

Re: own a Grizzly product?

#7

Re: own a Grizzly product?

Ralph Lindberg

I currently own..... three tools from Grizzly/Shop Fox, a commercial bandsaw, a tablesaw and a HEPA airfilter. I've bought some consumables (filters, plastic inserts, etc). But never had anything "fail" ugly

I started buying from them on the recommendation of two cabinet makers, who both thought they provided a reasonable tool for the dollar.

Like any firm, they will have items with issues, be the design, production, sparing, etc.

Here a few years ago Grizzly's lathes were getting, well, a good beating for a number of good reasons. In one forum the owner started asking questions and... there were several minor revisions in their lathe line, like speeds and head-stock threading.

As the company has grown (I bought my first tool from them, 25 years ago), it's been interesting watching the firm change. In the old days you might see the owner on the sales floor on any given day. Today there are, what three sales locations?

Recently I stopped in one day to just look (I was passing through) and had a question on a tool (the airfilter), the sales/help desk couldn't answer my question and called "upstairs". Well, the owner came down and answered my question and I bought the tool.

One other change that has happened. As I understand the owners brother owns (owned?) BusyBee in Canada and they had a not-to-compete agreement. Which must have changed as Grizzly is now shipping tools to Canada.

Note: Grizzly is their lines that they sell only direct. Shop Fox is their lines that they both sell and wholesale.

Note 2: Did you know the owner tried selling outdoor equipment? Yup, didn't last ling

Note 3: Yes he does woodworking, as I understand his personal shop, is, well, impressive. I suspect that we all know that if the owner(s) is(are) using the items, the product line tends to be better, why do turners all rave about Oneway, Robust, Vicmarc, etc? Because the people behind the company actually use the product.

Re: own a Grizzly product?

#8

Re: own a Grizzly product?

Dick Coers

Another good Grizzly story over on sawmillcreek. They gave away a Grizzly bandsaw for their anniversary. The guy that won the saw couldn't put it together because the rod that quick tensions the blade was missing. He had to wait 3-5 days for the part to show up. Wouldn't you think they would go over a give-a-way machine to make it 100%? Nope send the same old stuff and let customer service make it right. The 19" bandsaw I bought from them was useable. The cast iron wheels were so poorly cast, they drilled one side of the bottom wheel full of holes, and bolted plates of steel on the other side to try and balance it. They needed such drastic action since there was not enough cast iron to machine the complete face of the wheels. They were not successful with the attempt to balance it. Items left on the table would walk right off. I sent it back. They must have one of the largest customer service departments around.

Re: own a Grizzly product?

#9

Re: own a Grizzly product?

phillip medghalchi

Ralph, can you tell me where these guys have their home office at, please? I am going to Portland, OR on 16Th of this month to visit with my Mom and am thinking of taking these shoddy parts and go see the owner and let him know that how his people treated me. And, perhaps go to the BB bureau and let them know about this product and how they are washing their hands off it. They are trying to walk away from the liability that the tool rest wiggles on it's post and got caught to the piece I was working on and blew up my bowl. I was lucky enough to be out of the direct line of fire. Every time I tried to do something on this lathe some parts broke and I have spent quite lots of money on the side to repair the darn things, which finally I came to my senses and bought the Nova lathe. What upsets me is that they this attitude that oh well too bad, so sad. Not thinking that what we purchase is not like the bad food we ate at the restaurant and we can go somewhere else. some of our fellow turners have $1000+ invested in some of these tools we use.

Re: own a Grizzly product?

#10

Re: own a Grizzly product?

Bart Leetch

Located in Bellingham Washington.

Re: own a Grizzly product?

#11

Re: own a Grizzly product?

phillip medghalchi

Dick, here is my story, talk to a lady in customer service about the problem she said she makes a case, and pass it on to the higher management. then I get a call form some guy named John asking me if I could send the pictures and he gives me the techsupport@g........., then I get a call from another guy named Keith,w ho said he was from customer service (an absolute horses a.........) He is the one who didn't know said that they didn't send me any tool rest w/any grub screw with it. That tells me that the clown didn't even take time to see what took place and furthermore, he didn't have any idea about what parts the tool rest was comprised of. Anyways, then he threatens that the parts are more than 30 days old even though I explained that we had a death in the family and I could not attend to this matter sooner. He then says that they would only replace the parts, even though I protested that I will get the similar parts so what good would it do for me. I said then we are done with this conversation and I'll contact the owner or the CEO. I then hang up and couple hours later another lady calls me wanting to refund my money. That tells you how screwed up this company is. They already got this many people involved and they don't know what's coming their way yet. I just felt to share this here so no one would be taken by them in the future.

Re: own a Grizzly product?

#12

Re: own a Grizzly product?

Roger Chandler

I have a G0698 Grizzly 18/47 lathe that has performed flawlessly for over 3 years....not one issue.......I have turned on several 3520b PM's and they are nice indeed........the performance of the G0698 I have has been superb....it has been pleasantly surprising in light of the cost difference between the 3520b and the G0698......the 3520b is heavier and has a nicer banjo......but the performance is there for sure with the Grizzly lathe.

I purchased a Grizzly G0555LX bandsaw just last month, like the model given away on SMC.....this saw is the smoothest I have ever used in a 14" model. [I have used numerous models including the PM, Jet, Delta, and the Reliant] I have a Jet 18" bandsaw as well.......it is real nice, but the Grizzly saw is well machined, has heavy cast iron computer balanced wheels, and I have cut the full capacity on a log section on several occasions [I got the riser block kit for it as well] and the saw did not bog down even though the motor is 1 hp.......I am a happy camper with the Grizzly items I have so far.........both my lathe and my bandsaw have exceeded expectations!

Re: own a Grizzly product?

#13

Re: own a Grizzly product?

phillip medghalchi

Roger, I am glad that you you have had good results, yet. I am hoping that if it ever comes down to getting anyou serivice or parts they won't disapoint you like they did to us rest of the guys. It maybe that you spent lots of money on those machines so they are holding up since if you go do little research you'll find out that probably those companies all bought the same motor or the components form the same chinese manfg. co. and had their name stamped on it. If look at my lathe is the exact same copy of the one Horbor Freight is selling.are the same the only different is that after 2006 which my lathe was made in, HF bought the more hp in the motor to 3/4 hp instead of 1/2 hp that mine has. what I am upset about that when I went to buy replacement parts they the same junk that were originally made at the same time of the main lathe mnfacturing so they are same crap. On the other hands, if you look at their site you'll find out that they discontinued the lathe, however, they are still selling same shoddy parts for it.

Re: own a Grizzly product?

#14

Re: own a Grizzly product?

Roger Chandler

Phillip.......I have found that every company has higher end machines and lower end machines..........I always try to buy quality whenever possible......I find the old saying to be true......."you get what you pay for" and that being said, I realize that what ought to be is that every product we purchase should be first rate, but alas, it is not.

My experience with Grizzly has been stellar to date with very good customer service and helpful tech folks....one of the reasons I purchased from Grizzly to begin with was availability of service and parts in the future if needed.....usually Grizzly goes out of their way to try to resolve customer issues..........most folks I know have had good experience with Grizzly Industrial.

I hope you get your issues resolved, and soon....

Re: own a Grizzly product?

#15

Dick Hines

Re: own a Grizzly product?

Dick Hines

I have a Grizzly dust collector in the shop for years, somewhere close to 10 I think. The only thing that has gone bad is the starter compositor. Twice. But they are cheap and easy to change.

I also have a Grizzly dust filter hanging over the lathe that I bought at the same time. No trouble with that at all.

Re: own a Grizzly product?

#16

Re: own a Grizzly product?

phillip medghalchi

Roger, at this point I am forced to turn this issue over to our state attorney general for the safety issue. since the guy who answered had the attitude that even the less than 30 day purchase will not be refunded even if it failed. My safety was at stake when the tool rest wiggled lose from it's post and the lead screw on the tail stock was not any where safe to hold on the the 11.5" of bowl blank. The money on the lathe is already lost, what I am concerned them selling those defective part to someone else out there who may still have this lathe w/o taking any responsibility for the part holding up.

Re: own a Grizzly product?

#17

Re: own a Grizzly product?

Devon Palmer

I've had the G555 for 8 years now and other than regular replacement of thrust bearings (can't find good american made ones), I've had zero problems. Surprising given how I abuse this saw with bowl blanks. Changing the wiring on the motor from 120 to 220 was a great improvement as well. Seem like it has much greater torque now.