Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

Sanding hack - might be worth a try! *LINK*

Posts

Re: Sanding hack - might be worth a try! *LINK*

#2

Re: Sanding hack - might be worth a try!

waltben

Does look interesting, but won't particles of the plastic end up in the wood?

Re: Sanding hack - might be worth a try! *LINK*

#3

Re: Sanding hack - might be worth a try!

matt overton

Thanks Leo, this might be great for jam chucking odd shaped pieces. I ordered some. I'll let you know. MAKE is a great source, I missed this one so thanks for pointing it out.

Re: Sanding hack - might be worth a try! *LINK*

#4

Leo Cuellar

Re: Sanding hack - might be worth a try!

Leo Cuellar

I haven't ordered any yet to play with, but I will in a couple of weeks. I've heard that it is very tough stuff as long as you don't get it near the melting point.

Re: Sanding hack - might be worth a try! *LINK*

#5

Leo Cuellar

Re: Sanding hack - might be worth a try!

Leo Cuellar

That is a great idea! I hadn't even considered that. If you covered it with some friction tape, you'd probably get a real good grip as well.

Re: Sanding hack - might be worth a try! *LINK*

#6

Jerry Louden

Re: Sanding hack - might be worth a try!

Jerry Louden

What would you use as your source of grit?

Re: Sanding hack - might be worth a try! *LINK*

#7

Leo Cuellar

Re: Sanding hack - might be worth a try!

Leo Cuellar

While I haven't had time to research, loose grit is available in the form of sand blasting media, rock tumbler & valve grinding compound to name a few. Or another use might be to shape a custom profile in the plastic and just glue a piece of sandpaper to it?

I also wonder if you were to solder/weld/attach some wire or a disc to an old arbor if you could form the compound to make a low speed power sander?