Red Oak Mallet
Joe herrmann
I've been working to develop a mallet for an article and as a possible demo topic. I think I'm about there.
Knowledge You Can Build On — Est. 1998
Red Oak Mallet
Joe herrmann
I've been working to develop a mallet for an article and as a possible demo topic. I think I'm about there.
I too think you're 'there' - nice work
Re: Red Oak Mallet
Mike Stafford
That should do the trick. I don't recommend giving it to Andi.....she might find a use for it on your head.

Great looking tool!
Re: Red Oak Mallet
Harry Robinette
Joe
That looks like a small wooden sledge hammer, super job like the metal retainers.
Better not let the word get out.....
Rob Wallace
.....that you can make these mallets.
You are liable to get a call from "Gallagher" to ask you to make one "super-sized" mallet for his popular watermelon-smashing comedy acts.....
http://blogs.citypages.com/gimmenoise/gallagher5000.jpg
BTW - What are the metal rings made from?
Rob
Re: Better not let the word get out.....
Joe herrmann
Might be fun to make super-sized ones.
The metal rings are pieces of aluminum pipe that act as ferrules to prevent the heads from splitting during use. My wife says I over-engineer everything!
Commanders
Jorge
The super-sized mallets are called commanders, you will need an elephant to swing them. The ferrules traditionally were made of iron, thus the name "ferrules". Specially with oak, the tannins will marry the oak and the iron.
I have an ancient caulking mallet, used to build ships and they are still on place ~150 years later.
They are not a luxury if the mallet will be used for whacking and the tip of the handle should have a kerf and a wedge, so the head stays put.
Nice job.
Nicely Done!
I love a good mallet and that's a nice design
Well done, Joe!!
Re: Better not let the word get out.....
Brad Vietje
Nice, Joe!
Will the tannins react with the Aluminum? I thought perhaps the bands were stainless, (with brass pins?), but I would like to know how Oak and Alum. react to each other.
The big ones folks have mentioned are very useful in timber framing, when getting one huge beam to settle onto/into another, or tap a whole wall bent to drop into position. I don't know what serious timber framers would call their enormous wooden "sledge hammers" -- I've only known them as a "Thumper" -- seems to fit pretty well.
Safe spinning,
Brad Vietje
Newbury, VT
Re: Better not let the word get out.....
Joe herrmann
I wouldn't think there would be any interaction problems but we'll see down the road. I think I had one of those big "Thumpers" in mind when I designed this one. I kind of like the massive look.
That'll do nicely!