Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

filling a crack

Posts

filling a crack

#1

Dan Jechura

filling a crack

Dan Jechura

I'm going to try and fill a 1/4 inch wide crack in a end grain bowl I finished. The log sat in my shop for a year. Spalted, ambrosia Maple. It sat ruffed turned out in my shop for 3 months ( not cracked). It was nuked enough times to bring the moisture down to 10%. I finished turning it 2 weeks ago ( still no cracks). I really love the look of the bowl. I had to use thin down lacquer to soak the bowl so I could finish it. Lots of tear out. ( I've done this 3 time now and turned out OK). I finished the bowl in wipe on poly. 7 coats. It sat out in the shop for another couple days. I brought it into the house and 2 days later it cracked from the top of the bowl to the pith in the center. The bowl is around 3/8's thick. Bummer. >(

My question is do I put painters tape on the inside or outside to hold the 5 min. epoxy while it dries. I'm thinking ease of removing the tape after the epoxy dries.

or maybe I'll just lace the crack up, like a shoe and call it art. :D

Dan J.

Re: filling a crack

#2

Re: filling a crack

Doc Green

Dan, I would use epoxy and coffee grounds, with enough coffee grounds added to make a thick paste. Then force it into the crack, etc.

There is no problem in removing the blue painters tape after it is used as a dam for the epoxy mixture.

A different approach is to take slivers of a soft wood (for ease of working) and fit the slivers into the crack so that the epoxy mixture cannot pass all the way through the crack. Tack the slivers in place with thin CA. Then you won't need the tape. This gives you more control over where the epoxy is going when you press it into the crack. You can see what you're doing.

Good Luck, ~Doc

Re: filling a crack

#3

Re: filling a crack

john Veerkamp

Every laced bowl I made sold immediately. I have laced with leather, but my favorite is stranded copper wire. It can be patined (sp) for a cool aged look.

Re: filling a crack

#4

Don Leydens

Re: filling a crack

Don Leydens

Hi Dan. I vote for the lace-up as well.

Re: filling a crack

#5

barry rockwell

Re: filling a crack

barry rockwell

Dan, lacing up the crack is a great idea. Another option would be "stitching" it together using a biscuit joiner and some contrasting wood for the stitches. See some of Jerry Kermode's pieces.

If you decide to fill it, try making a dam both inside and outside the bowl with slices frtom a plastic milk bottle and hot-melt glue. Then pour in some colored slow cure epoxy resin from the rim and it will fill the crack completely. The plastic and hot-melt glue are easily removed.

Re: filling a crack

#6

Ric Taylor

In the Beginning, Turn the Pith Out Of It ...   


Re: filling a crack

#7

Dan Jechura

Re: In the Beginning, Turn the Pith Out Of It ...

Dan Jechura

ya I know but the ambrosia looks soo much better in a end grain. An I will take a chance every so often.

Dan J.

Re: filling a crack

#8

Re: In the Beginning, Turn the Pith Out Of It ...

Barry Irby

I agree you should lace the bowl. I have seen one done with old steel or iron wire and it looked great, but it was a very rustic bowl.

I have turned several bowls with the pith in the bottom to get the vertical ambrosia stripes. I made the bottom something of a dome, sort of like the bottom of a champaign (sp?) bottle. Not quite as exaggerated, but it seemed to work.

Re: filling a crack

#9

Re: filling a crack

dan Jechuea

I have turned a dozen or so end grain bowls out of Ambrosa malpe and 1/2 of the did not crack and a couple of them did crack but after they where glued they did not look to bad. An only a couple where unuseable. Still learning what works and don't work That's why I buy wood by the truck load.