Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

Working with chakte viga

Posts

Working with chakte viga

#1

Working with chakte viga

waltben

About five years ago my wife was given a couple of squares of this stuff. It sat in our extremely dry basement until a week ago when I was given permission to use them. The squares were only 6" and 5+" so they weren't good for bowls by themselves, but I figured I could combine them with some figured yellowheart and make something interesting. I roughed the yellowheart, smoothing the bottom and glued the larger (rounded) chakte viga to its bottom. Then I turned the combined pieces to an open bowl. The inside sanded well, although I found the chakte loaded up sandpaper VERY quickly as though the wood was extremely oily. I was careful sanding the outside to keep from overheating, but when I'd finished I found a lot - and I mean a real lot - of heat checks. (I'd post a pic, but I've just put the first coat of finish on it.) Since my wife has said she doesn't care, I guess it'll become her's, but I'm still perturbed about those cracks. Nothing I've found anywhere on the Internet cautions you about checking when sanding. Anyone have any experience with this wood?

Re: Working with chakte viga

#2

Mike Stafford

Re: Working with chakte viga

Mike Stafford

I have turned a lot of it. It is one of my favorite woods. I frequently use it when I demo. I carried a bunch of stick to Norway for demo wood and to trade with people.

It is an exotic and is subject to heat checking particularly if you sand at high speed. It is oily but generally that is not a problem as long as you change paper frequently. When sanding end grain I almost always use wax as a lubricant.

It could be even though the wood was several years old if it was waxed it could have reacted unfavorably to being exposed to a dry environment. You did not say how thick the blank was but it might be that you should have roughed out the blank like a green wood bowl and let it acclimate for a while.

Here is a picture of a chakte viga box about 2" tall and 2 3/4" in diameter.


Re: Working with chakte viga

#3

Hijack for Mr. Stafford?

Barry Irby

To me that looks a lot like Osage Orange. How is it different? On a side note, I may have some Osage that might be box blank size. Would you like some?

Re: Working with chakte viga

#4

Mike Stafford

Re: Hijack for Mr. Stafford?

Mike Stafford

The colors may be similar but there is no comparison between chakte viga and osage orange. For one thing the smell of the chakte viga is sweet and perfumy and it is oily. It is not as hard and brittle as osage although it may be more dense. The chakte viga grain is finer.

I have had a few osage orange blanks. Here is a box turned from a piece. The grain while similar in color is very different in texture.

Osage orange is not readily available where I live. There is too much competition with the pine trees..... :b