Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

Hunter #4 cutter wear *LINK*

Posts

Hunter #4 cutter wear *LINK*

#1

Hunter #4 cutter wear *LINK*

John Lucas

Since I was doing a demo of a platter turned with nothing but Hunter tools I thought it would be interesting for everyone to see my long term test of the cutters. This is a #4 cutter. The first tool I got about 2 years ago or more. I don't use it all the time. Mostly when I'm doing a box interior for the final passes or anytime I have a piece of wood that doesn't want to cut clean. I also bring it out anytime I have someone over to the shop so they can see how it cuts. So it's probably been used quite a bit but not used every day for every cut. In fact it was the one I used in the first Hunter tool demo Oct. 2010 so I had it before that.

Anyway I still can't believe how well it cuts. I had a piece of spalted maple that would not cut clean with my 35 degree detail gouge. I ran this old cutter across it and got a clean cut with no tearout. Then I removed this cutter and used a new one. I could feel the difference, it moved easier, but both left a very clean surface.

Here is a photo of the old cutter next to a new unused cutter so you can see the edge. I discussed this with another turner this weekend and we think the chipped edge is still cutting like a piece of knapped flint. The chipped areas themselves are acting like knives. Don't know if that's true but if you look at that nasty edge it's hard to believe it would do a decent job but it does.


http://www.youtube.com/watch?v=nfp2kvhH6Mo

Re: Hunter #4 cutter wear *LINK*

#2

Mike Stafford

Re: Hunter #4 cutter wear

Mike Stafford

Interesting John, can you feel any grooves in the surface left by the chipped cutters?

That worn cutter looks like you used it to turn a paving stone.....

Re: Hunter #4 cutter wear *LINK*

#3

Re: Hunter #4 cutter wear

John Lucas

Mike that cutter left a finish you don't really need to sand. I do anyway out of habit but if you just put wax or finish on the cut it's fine. I could not see or feel the difference in cut between the new and old cutter. I could feel the difference in the ease of feeding the tool with the new one moving easier.

Re: Hunter #4 cutter wear *LINK*

#4

I know the cutter on my favorite.....

JamieDonaldson

...Hunter #5 has to be replaced more from abuse than actual use. Students and I have chipped the carbide requiring replacement more often by whacking it into other tools more than actual use cutting. :b

Re: Hunter #4 cutter wear *LINK*

#5

Don Leydens

Re: I know the cutter on my favorite.....

Don Leydens

Ditto, Jamie. Mike is a friend of mine and he keeps asking me "do you need any cutters?". I always say "thanks, but no."

Re: Hunter #4 cutter wear *LINK*

#6

Re: I know the cutter on my favorite.....

Gary clarke

John, your video on the cutter is great and I think everyone should see it if they have time.

Re: Hunter #4 cutter wear *LINK*

#7

Re: Hunter #4 cutter wear

Mark ravensdale

Been using my hunter Hercules abt 6/7 months now and have been very pleased with it, I watched your videos on YouTube John and they helped a great deal, shame they don't mention t he bevel rubbing cut in the instructions that came with the tool,

By the way, the 3/8 inch version of the Hercules is a FANTASTIC tool for plastic/resin pen blanks, if you use the bevel rubbing method like you show John, one hardly needs to use abrasives, it's a pen turners dream!

Re: Hunter #4 cutter wear *LINK*

#8

Re: Hunter #4 cutter wear

John Lucas

Yea I've been using the small Osprey tool for pens. It's the same size as the mini Hercules I think but has a round shaft so it handles more like a bowl gouge. It does leave a pen with very little sanding.