Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Have a question? Ask Woody!

Chain driven lathe???

Posts

Chain driven lathe???

#1

Chain driven lathe???

Mark ravensdale

This may seem a little bit silly to some, but I was wondering today why no one makes a chain driven lathe,

Chains are strong and efficient and speeds could possibly be selected using some sort of derailleur arrangement like on a race bike (still using electronic variable speed though), and think how easy it would be to change a worn out chain when compaired to changing a worn belt (like used by most lathes),

I used to race bikes and could easy get 12-14 thousand mile out of a chain (if well looked after)

It just seems a no-brainer, or am I wronge (usually am!)

What do you think???

I know there are a couple of pro turners that turn huge stuff that have designed there own chain driven lathes, but why have none of the big manufacturers adopted chain drives???

Over to you!!!

Re: Chain driven lathe???

#2

Re: Chain driven lathe???

Henry (Raleigh, NC)

I'm no expert, nor a pro. My first take is that chains don't allow slippage in the (unlikely/likely) event of a catch,

Henry

Re: Chain driven lathe???

#3

Mike Stafford

Re: Chain driven lathe???

Mike Stafford

Henry, the object of this exercise is not to have catches! :D

I will not admit to having any myself....... :b

Re: Chain driven lathe???

#4

Re: Chain driven lathe???

Mark ravensdale

Good point!

But maybe some sort of rudimentary clutch could sort that out, but that I suppose would then add cost, but then again if using chains a catch would/could just simply stall the motor???

Good point though!!!

Re: Chain driven lathe???

#5

Re: Chain driven lathe???

Henry (Raleigh, NC)

Mike - the reason I bought the lathe I did was because the previous owner certified that it was and always will be catch free;). So chain drive here I come!

The only reason I haven't had a catch lately is that I haven't turned on my lathe. Hope to gt back to it soon.

Henry

Re: Chain driven lathe???

#6

Re: Chain driven lathe???

Mark ravensdale

Henry, you must have got your lathe from the same guy as me ;-)

Re: Chain driven lathe???

#7

If using a chain, why not a Nissan CVT?

Dick Coers

Doesn't Nissan use some kind of super chain in their continously variable transmissions? Then you get reverse as well! To heck with that pesky variable frequency drive, or even those pesky electrons all together. Throw the entire power train under the lathe, and then you can measure you work by bpg. That's bowls per gallon.

Re: Chain driven lathe???

#8

Re: Chain driven lathe???

John Peck

See "Freewheel Lathe Drive: Bicycle Parts Convert Muscle Power" by Richard Starr, Finewoodworking, No. 15, March/April 1979 (page 65) for plans for a bicycle chain drive shopmade lathe.

Re: Chain driven lathe???

#9

Steven Antonucci

There are gas powered lathes

steven antonucci

I've seen videos somewhere of a djembe maker using a Volkswagen engine to turn drums. The innards of the drum are removed by the mother of all auger bits.

I think you are probably correct that the chain would offer better power transmission, but I would agree that it could be dangerous if the chain couldn't slip. The idea of a "real 1-3 HP" getting a hold of a turner on the other side of a catch could be deadly. Instead of bowl prints in the wall, we'd start seeing head prints...

BTW- The djembe machine was completely automated. No people touched the wood while it turned.

S

Re: Chain driven lathe???

#10

Re: Chain driven lathe???

Don Orr

There's a guy up near Plattsburg, NY called the Adirondack Woodturner who uses a home-made lathe that uses a chain drive and an old truck transmission. He does some real nice work. Some of his bowls are over 30" diameter. There are a couple of long videos of him if you google.

Re: Chain driven lathe???

#11

Dick Hines

Re: There are gas powered lathes

Dick Hines

You could use the drive train from a Smart car. You may have enough power to turn pens.

Re: Chain driven lathe???

#12

Steven Antonucci

Have you ever driven a Smart?

steven antonucci

They are faster than you'd guess...

S

Re: Chain driven lathe???

#13

Dick Hines

Re: Have you ever driven a Smart?

Dick Hines

Not sure how much room I would have in a Smart Car. I am 6'5" and tip the scales at 230. I don't want to ride anything that is smaller than my motorcycle. See picture on my header

Re: Chain driven lathe???

#14

Denis Putland

Re: Chain driven lathe???

Denis Putland

I was a farmer in my past life so I have had lots of chain and belt drive experience.

Besides the point about shock slipage needs I believe you are asking for vibration problems using a chain drive on a lathe.

A properly maintained belt drive should be vibration free.

Denis

Re: Chain driven lathe???

#15

Re: Chain driven lathe???

John Lucas

You must have bought better chains and sprockets than I do . I'm not a racer by any means and put about 1500 miles a year on mine. After about 3 years I have to replace the chain because the links stretch and about every 5 or so replace the sprocket because the gullets have gotten so deep the derailer doesn't work as efficiently.

My toyota Pickup uses a chain timing belt. Most cars of course use fiber belts.

Many of the top end motorcycles have gone to belt drive. Not sure the reasoning other than not having to oil them and they are probably quieter.

Re: Chain driven lathe???

#16

Steven Antonucci

they're also bigger than you'd guess

steven antonucci

The Smart 4+2 is meant to be a two person car, with two kids in the back. I'm 6'1" 210 and it surprised me.

S

Re: Chain driven lathe???

#17

Re: Chain driven lathe???

Pete in Holland, MI

You'd go deaf with a roller chain running at that kind of speed.

High speed applications are not well suited for chains. Poly-vee and timing style belts are as good or better than chain at high speeds. Heck - - check out a Harley these days ? Back wheel is driven by a belt !

Cost is also a factor.

Pete

Re: Chain driven lathe???

#18

Re: Chain driven lathe???

Mark ravensdale

John you just got to wash the chain regularly (i washed it every sunday after clubrun so thats about every 350-400 mile) and then lube with a GOOD lubricant, most people think just spraying with lube is enough, it ain't!!!

The last year I was racing I did well over 12 thousand miles (not including races) and never replaced a sprocket or chain, good to see you know to replace sprocket and chain at same time, a lot of riders don't realise that one, if you don't it makes for a nice clunky ride (especially when heaving uphill)

I gave it up in the end, just too dangerous while training, too many cars and not enough road ;-)

Had two good friends killed while out training, so thought SOD THAT!!!

Re: Chain driven lathe???

#19

Re: Chain driven lathe???

Mark ravensdale

Check most other bikes what do they use ???

Harley's pah!

Re: Chain driven lathe???

#20

Re: Chain driven lathe???

Mark ravensdale

Getting ready for the storm!!!!

Re: Chain driven lathe???

#21

Dick Hines

Re: they're also bigger than you'd guess

Dick Hines

I think I will stay with my F150 or my FJ Cruiser

Re: Chain driven lathe???

#22

Dick Hines

Re: Chain driven lathe???

Dick Hines

The belt is runs cleaner. It will blow some dust but that's better than oil off the chain. I also think they may last longer than a chain .

Re: Chain driven lathe???

#23

Re: Chain driven lathe???

John Lucas

Mark I've been riding about that far per year for the last 30 years or more. So far not even a close call. Since the roads in Tennessee are narrow and some drivers are pretty inconsiderate so do come a lot closer than the 3 feet Tenn. laws says they have to stay over. I just figure when it's my time it's my time. I ride a motorcycle and still go rock climbing so I guess risk taking is just in my blood.

Re: Chain driven lathe???

#24

Re: Chain driven lathe???

John Lucas

Mark I have a real man's bike, A Kawasaki 650KLR. You can take it anywhere. I rode it up a creek and a mile down a railroad track last summer to get to a cave I had been looking for. Can't do that on a Harley. :) No Anti lock brakes, computer controlled motor etc. You can work on it in the boonies with an couple of wrenches and pliers. AND, it runs on a chain. :)

OK deep down inside I want a BMW but it does have all the fancy, can't work on it yourself stuff but man do they run smooth.

Re: Chain driven lathe???

#25

Re: Chain driven lathe???

Josh Bowman

Here's where I THINK is the problem. Your bike using and average of 60 rpm on the crank and develping an average of 12.5 mph would keep a chain about 13000 miles or 1040 hours worth of pumping away. That also must be maintained every few weeks (cleaned/adjusted). Running on a lathe with a motor going just 1000 rpm , the miles/time racks up quickly. A conservative number might be 62 hours before replacement, with maintainance done every few days. Plus the chain and derailer would be more complicated than the varible speed belt drive. Also the speed of the chain would make a mess of the lube. Having said all this, it would be neat to see.