I like to see if any one of you would be interested in swapping your local grown wood turning blank for a one form my Area.
I have done this with many other turners from around the world and they have been very gracious to send me some of the very interesting blanks of woods that i would not be able to get them in S. Texas. They have received our famous Texas mesquite and Texas pecan. I have also been getting some of even exotic woods form Australia and other parts of the United States that will not grow in my area.
Here, is how I work it. there would be no money involved in swapping. I pay for a flat rate Medium or large size box's postage form my side and you pay from your side. This will give other turners to chance to try out the woods not from their area and most importantly, the friendship that will transpire form this.
i f any one is interested, please let me know and let's share this idea.
What say you? I see how this will go and then explain the details to hose who might be interested
I've also done this many times with other turners. When I get back to Montana in April I'll contact you. I have access to a lot of ash, Russian olive, box elder, birch, and others, but I would love to get some mesquite, pecan, hackberry, and such.
I would be interested. I have Black Walnut, Ambrosia Maple, apple, sassafras, Mulberry and Cherry. Most of my blanks are cut in the round and are green. I would be interested in both of yours. Just let me know what size you are looking for. I can send pictures.
For most of the continental United States, there are no regulations about sending wood through postal or common carrier methods, however in some states, there are restrictions on shipping various kinds of wood, or ANY plant/agricultural product into certain areas. You should be aware of this before you start shipping wood blanks around the country. For most areas it should not be a problem, but there ARE restrictions in some areas. If you send wood blanks, PLEASE be sure they are completely free of any bark, and do not send wood with obvious "worm" holes or evidence of insect activity.
If you will recall last summer, there were numerous questions and concerns raised about shipping or bringing wood into California for the AAW Symposium in San Jose, due the Agriculture Department restrictions placed on movement of wood and certain wood products. Some states have restrictions on moving firewood or other "unprocessed" wood containing bark, etc. to reduce the chances of spreading undesirable organisms such as the Emerald Ash Borer and other invasive and highly destructive pests.
The talk of shipping wood products across international borders without adequate inspection, quarantine, or fumigation is also quite problematic. Without proper accompanying documentation, this is very much illegal. Do not ship unprocessed wood or other plant/animal products internationally unless you follow the necessary guidelines and requirements for inspection and documentation. The confiscation, fines, and possible other penalties are much worse moving things across international borders, but more importantly, you do not want to be part of any situation where you are spreading invasive or damaging organisms. It is really not worth it on several different levels!
Those sending (or receiving) these kinds of shipments can risk confiscation of the items if they are discovered to be in violation, and can also be subject to fines or other penalties, particularly if specifically-identified restricted wood species, or any kinds of pests, are found in the shipment.
Just some advice from someone who has identified wood from confiscated shipments for federal inspection and postal authorities.
There are restrictions on wood entering NH. In June 2010, NH banned the transport of firewood (wood with the bark intact) into the state. This was as a result of the presence of the Asian Long Horn Beetle infestation discovered in Worcester County, Massachusetts, which borders New Hampshire. This beetle infests the maple trees, eventually killing it. Maple syrup is one of the staple industries for the residents of NH (as well as Vermont).
Anyone resident wishing to transport firewood into NH for their own personal heating (i.e., you are not a commerical vendor selling or delivering firewood) must complete a certificate (online or via mail) that the wood being transported is not coming from a banned county. You include the address/location it is coming from and going to. The certificate must be in the vehicle transporting the wood, and is good for 30 days from the date of application.
I've completed one of these at least 4 times since the ban. If we don't take responsibility to self-regulate ourselves now, the opportunity to engage in our passion (woodturning) may be severely restricted to all of us someday.
This is only the tip of the iceberg. Our trees are not in good shape. Climate Change induced by Global Warming is one of many triggers.
I'll go farther than Rob and say that there are many other species being attacked, and spreading the bugs and diseases around the country may not be a good idea. If you do, to be safe, the wood should be completely debarked and either microwaved or fumigated, at the very least. Soaking it in alcohol might also be a good idea. Sapwood can be as bad as bark in some cases.
Here in coastal Maine, the birches are dying, all of them, so it did the hackmatacks a while back, and also the balsam firs. Also a horned beetle is attacking the old spruce trees, those are dying as well.
Rob, I wanted to thank you for the note. You are right and we all have to be respectful of those facts you stated, since we do not want to spoil this idea and taking the freedom of turning away by making simple mistake which owuld result in spreading diseases or even pest round our world.
I'd like to add the people who were involved in my past swaps are seasoned turners and some helped me to understand the risks and other concerns involved. Furthermore, like the woods that I recieved from Australia were all processed, cut to a blank size, Fumigated and in most cases even wraped with shrink or seran wraps. For, instance, I bet that no one can get hairy oaks in America, unless you pay a dear amount of money for it to buy it commercailly and if you are lucky at that. This tree jsut only grows in avery remtote area in East Australia and no were esle. so, how would get chance to try this wood unless soem one gracious share a piece of it with me.
So, we will set some prameters for this swap for those involved, so we all can enjoy it and keep everything in check.
tell you what.. i'll trade you some mesquite for some pecan .. or pecan for mesquite... that way it wont cross the border...
but everything i send is nuked in the microwave until dry and also most are fumigated., cause if you dont , your mesquite turns into worm food...
I have a LOT of nuked pecan pen blanks, and elm.. and mesquite... all from tejas.. would love to figure out wwhat to do with them.. other than making my own pens... just have too much wood...
Thanks, everyone who answered to this thread. I'll be glad to share what I can get my hands on with you guys. In order to do this I'd like to ask for suggestions for setting up some guidlines for us all to follow so all those valid points mentioned above will be obsereved, and the main goal of sharing and enjoying the expereince would be preserved. I'd aslo like to invite more seasoned turners to particiapte in this so we all can learn something from thier expereinces too. If all agree, then lets set up the guidlines and get on with this swap. I am excited to share this with those interested. Meanwhile, I have to keep it affordable too, so I don't have to go get a loan for sending these boxes at a $16.00 a pop.
Darin, now you got me confused to. I am not sure what you are asking me. I am in San Antonio, and have all that you mentioned. I am not getting into pen making at this time, and have lots of very nice pen blanks that I have accumulated within last few years. I suggest that you post here what you have or want then some other member will see it and perhaps would like to trade you their wood with you. If you read my original thread, it states to share our local wood with something that will not grow in S. Texas. and then we send them what will not grow in their area. You know that Texas pecan is our state tree, therefore will not grow somewhere else like the ones we got.
It is good that you and other participants in any forthcoming wood swap will hopefully follow as many preventative measures to reduce the chances of spreading harmful insect pests or diseases around the country. This is extremely important.
With regard to international shipping of wood, you seem to be missing the point. Regardless of whether the wood has been dried, fumigated, or otherwise sealed (BTW - wrapping in plastic only protects the wood somewhat from rapid dry-down, but does essentially NOTHING for limiting spread of insects or diseases, particularly if the wood still has attached bark), the fact remains that without the necessary paperwork to accompany your shipment, sending unprocessed wood across international borders is still illegal, and both sender and recipient risk confiscation of the shipment and possible subsequent fines or other penalties, which can be serious. (e.g. Lacey Act violations)
The fact that the wood being shipped may have been irradiated, fumigated, or kiln dried, and the individual shipping it to you from Australia seemed to be doing things correctly (as to sending pest/disease-free wood), the LAWS involved with international shipping via postal or other carriers require proper paperwork to accompany the shipment. The least of which includes a customs declaration as to the actual content of the shipment package. If biological material is involved (including unprocessed wood), there must be documentation (typically a phytosanitary certificate) which certifies that the contents were inspected and found to be insect/disease free by an authorized inspector. If there is a potential that the contents of the shipment involve plants or animals that may be vulnerable, listed as threatened in their country of origin, and/or appearing on the international CITES list (Convention on International Trade in Endangered Species) or national lists of plants of concern, additional documentation is needed for these shipments. (Since the Australian oaks are 'rare', are they listed on a CITES list, or on any list of Australian plants of concern?)
Despite their best intentions, your friend in Australia shipped the wood to you illegally if this documentation did not accompany the shipment. My initial post was to inform people that they will open themselves up to possible personal legal problems if they ship or receive wood (or other biological materials) internationally without correct documentation. Even though individuals may not be commercial operations, they still, nonetheless, have to comply with ALL international shipping laws, and have correct customs declarations, include phytosanitary certificates, and in general, provide all necessary point-of entry documents. It is your choice whether you want to take the risk by ignoring these requirements.
BTW - Obtaining these documents is a real hassle (I have done this many times when importing various live plant materials into the United States from Africa, South America, and Europe for botanical research purposes), and even though I know the rules, follow them explicitly, and have a USDA import permit, I will not import wood internationally as an individual. I do buy exotic woods from importers whose business it is to bring the inspected woods here following proper legal means. For the average woodturner who wants to follow the regulations and not risk legal problems, they should not ship or receive wood internationally. As others have noted, we have enough of our own problems with exotic pests, invasive species, and diseases that threaten natural and agricultural systems, and just for the sake of turning a new kind of wood, I do not understand why people would place themselves and the local environment at risk by moving potentially problematic wood illegally.
I bring this information to everyone's attention to make them aware that there is much more to moving wood and other materials around than throwing it in a box and sending it to some location where it is not native. There may be biological and legal consequences for these actions if done without sufficient knowledge of the reality of the situation.
sorry.. i was being slightly sarcastic to the world in general... was meaning to say just trade within the state and no one would be upset..
but i do have a lot of penblanks... and logs the size of tires... so if you ever want some spalted elm or something i would love to trade for some mesquite or box elder, which i hear is prolific in sa...
My brother is a landscaper and i get whole trees sometimes... most of it turns into firewood, but i just got a large ash log, and have lots of elm, caultapa, china berry, slippery elm, spalted elm, pecan, mimosa, hackberry, blackwalnut, etc.. my backyard pretty much looks like a lumberyard that has never cut lumber but is waiting for someone to cut... many many many logs...
just nothing exotic like mesquite...
it's very frustrating that there is no mesquite 150 miles east of you.. and what is here is burned for firewood... and yet it is one of the most common trees in your area...
but also i get frustrated by red tape... such as shipping wood.. i see the point, i just wish life was easier.
Rob, I thank you for your input however, you are making this sounds that like we didn't know what we were doing. I would appreciate you send me an email and ask me how we did it rather going and typing that my friend or I shipped illegally. This would make both of us sound like we were incompetents. I have done my studying of this and I like to get some benefit of the doubt that I did my homework before I did what I did. In addition, when either one of us had to send the woods we had to get all the paper works done properly. I appreciate your background and the degree, however, assuming some one did something illegally is not appreciated and other people needed to be given credit for having some knowledge of thing going on around them.
From my past posts here you can tell if I don't know something for sure then I ask the forum for more info. and I respect other turners experiences, how ever, I won't go attacking or accusing them of doing it illegally.
The other point is this, that even if I do pick of woods that are let's say about from 80 or 90 miles radius around where I live, and i don't have a degree in botany, I then bring the wood to my place and let's say it is spalted and I throw it on the lahe, and turn. Don't you think if there is anything in that wood it already was trans[orted to my area by me doing this. I am sure do gather wood form the cities around you if the opportunity arises. Of course you have a dgree in biology not all other turners have that. So, we have to send those woods to a lab before we can turn it? so even in my own general area I can spread diseases or bugs, too. So, where did this hobby go wrong?
I have spalted ample and pecan, so what ever i amke out of them is not going to be safe?
for now I have to halt the activities of doing any turning or swap due to a death in the family. I will get back with you guys and follow through to see you guys will get a fair share of this swap. Thanks for your patience.