A while back a tree guy stopped by my shop and dropped off a couple pretty ugly oak burls. Don't even know the guy. Couldn't even get a pen blank out of the first one, but managed to get this out of the other. The base is from the same piece, but from a different spot. Thought I was gong to loose her when a crack developed near the bottom, but she held together. No embellishments on this one. I really enjoy making these types of turnings and have a bunch more in the works. Your criticism is appreciated (good stuff too :-) )
Finished with Tung Oil and brought back a bit with steel wool and Ren. wax. 5-/2" tall x 6" across.
Nicely executed form - good proportions and well faired curves - especially when doing turning with the void present for much of the operation! Very pretty.
BTW - I suggest that you invite 'critique' as opposed to 'criticism' - in some (many) cases, comments provided are positive and worthy of praise as opposed to generally negative "criticism" comments....
Don, a really excellent piece. It's a real turning achievement to keep the shape so nice, and even holding it together, considering the structural limitations of the raw material. The flare of the top is especially nice.
A suggestion: the base looks a little heavy in contrast to the lightness (thinness and airyness) of the top. Maybe the base could have been smaller in diameter and have a thinner bottom lip, more like the thickness of the top.
I do love your finishes. They bring out the beauty of the burl nicely without distracting.
A fine piece of turning. Can't wait to see your next ones. Maybe you could give my address to your source. I can dream, can't I?
Hi Craig! Yes, there actually was a lot of trial and error to get those voids in just the right place. The outside of the burl looked like garbage, so this was pretty deep inside. Thank God for band saws!
Don, Great piece. I like all the voids. That adds so much character to the piece. The finish really compliments the burl. What finish did you use? The only problem I see with it is that it won't hold very many M & M's but, maybe that was your plan, to pour the M & Ms in and hold your hand underneath. The company can have the ones that stay in the bowl. :-)) Seriously, that is a really nice piece that showcases your turning and finishing skills very well. Keep up the good work and keep raising the bar to challenge the rest of us.
Hi Bob! The finish is about 5 coats of Tung Oil (and wiped off real well), 0000 steel wooled in between every other coat. That looked too shiny to me, so I cut it back with 0000 steel wool and Renaissance wax. Then hand buffed.