The cabinet saw was getting lonely
Alan Zenreich
Since I began woodturning, my cabinet saw doesn't get much use.
However the turning project I'm working on requires many 1/16" end grain wood slices, so I configured the saw with an Incra miter sled and a thin kerf Forrest saw blade, and spent a few hours slicing up hardwoods.
When the project is done (it involves several techniques I'm doing for the first time), I'll share the results... good or bad.
That's one of the nice things about turning, there are so many avenues to explore.
http://www.youtube.com/watch?v=Qssvp7zCjmw



