Carved Spiral Hollow Form
Bob Moffett
This started out as a hollow form with flutes. Then when I was hollowing it out I cut through the bottom of one of the flutes in the side of the vessel. I have always wanted to try cutting through the bottom of the flutes and make a piece based on Stuart Mortimers’ designs. So, not wanting to waste all the time and work that I had in this piece, I decided to turn lemons into lemonade. Hence, the name “Plan B”. Well, I said to myself (among other things), Hark! a redesign opportunity presents itself. So I carved out the rest of the flutes and did a lot of sanding and this is the result. The hollow form part of the piece is ambrosia maple and the finial, which is based on Keith Tompkin’s post of dimensions of a finial, is made from walnut. The collar is textured both inside and out with a Wagner texturing tool. Now that I have done one, I will probably do some more of them and improve upon the design. If someone says that this reflects the influence of Stuart Mortimer and Keith Tompkins upon my turnings, they are 100% correct. I would also like to thank Jim Ackerman, another turner in our club, for help with the photograph. Now that I have gotten my nerve up to turn pieces like this, I would like to do some more so C & C are more than welcome.


Truly a wonderful piece of turning, sir. Impressive & inspiring, too.


