Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

Morse taper tailstock extender

Posts

Morse taper tailstock extender

#1

Aage Rendalen

Morse taper tailstock extender

Aage Rendalen

When I got my OneWay coring system, the guy doing the coring, used his tailstock, with a no. 3 morse taper extender from OneWay.

Question: What kind of extender would work with a PM 3520? How about turning a wooden extender, since will only be used to support the blank during coring.

Re: Morse taper tailstock extender

#2

Re: Morse taper tailstock extender

Mike Brazeau

You need a No. 2 Morse Male to a No. 2 Morse female. I bought an extender to use on my 2436 when coring and rarely use it. Find it gets in the way and is not really needed if you use a reasonable speed.

Re: Morse taper tailstock extender

#3

Re: Morse taper tailstock extender

ihmserv

grizzly item #H5895 is just the thing.

http://www.grizzly.com/products/Extension-Socket-2-2/H5895

Re: Morse taper tailstock extender

#4

Steve Kubien

What Mike said...

Steve Kubien

...except I do like using mine, especially when I'm using the two largest blades.

Re: Morse taper tailstock extender

#5

Re: Morse taper tailstock extender

Barry Irby

I have one of those, not the same brand and mine is longer, but in the right application, its a Tigger. (Tiggers are wonderful things. Just ask him.) Can't remenber where I got mine.