Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

Gift ornaments for my Demo

Posts

Gift ornaments for my Demo

#1

Gift ornaments for my Demo

John Lucas

ONe of my Demo's will be my gift ornaments. These are ornaments that thread together so you can hide gifts inside. I was having trouble creating the hand chased threads and finally realized that my chaser was dull. Apparently making them out of bolts is not the optimal solution. Cheap, but I was purely guessing at any hardening procedure and apparently it didn't work all that well. I'll just have to remember to touch it up often. Here are two of them. I left the finials a little thick I think. The spalted maple one was left extra thick because I thought it was too fragile but I think I went overboard. It looked thinner on the lathe. The bottom one no longer opens. I screwed up the threads by making them too small so I just glued it together. There's just no room for error on 20TPI. I went back to 16TPI for these.






Re: Gift ornaments for my Demo

#2

Mike Stafford

Re: Gift ornaments for my Demo

Mike Stafford

They look great John. You should give all three to members of the same family at the same time. Give the one that does not open to the family member who can take a joke. When they unwrap the ornament tell them to open the ornament and see what is inside. Sit back and watch the person whose ornament is glued together.

I have an uncle that would turn red in the face trying to open the ornament that was glued. :D

Re: Gift ornaments for my Demo

#3

Leo Cuellar

Re: Gift ornaments for my Demo

Leo Cuellar

They all look nice, John, but I think you got the curve to flow best on the spalted one.

Re: Gift ornaments for my Demo

#4

Don Leydens

Re: Gift ornaments for my Demo

Don Leydens

John, the threading and hiding the present idea is terrific. Don't listen to what Mike says, he's such a trouble maker! ;-)