Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

more Ukibori experiment

Posts

more Ukibori experiment

#1

more Ukibori experiment

John Lucas

I tried some fairly soft Walnut. Still not perfect but getting better. I used the drill press to press the stamp into the wood. I also changed the shape of the heart just a little. It's interesting that in some areas the heart was soft edge looking and other areas it's hard edges. I still think the choice of wood is going to be the key to making this work.

Re: more Ukibori experiment

#2

Re: more Ukibori experiment

John Jordan

John, you're going to have to un-retire. You are getting so much done, you are making some of us seem lazy.

Brent Skidmore has done quite a bit of this, mostly in basswood. He calls it a made up funny name because he couldn't remember ukibori. There are some pictures on his website, but the elements with this technique aren't real visible. I suspect if you sent him an email he would send you some photos and share info with you. He's a good guy. www.brentskidmore.com I believe.

John

Re: more Ukibori experiment

#3

Steven Antonucci

I'll keep him busy...;)

Steven Antonucci

John-

This one looks better, but to my eye, it almost needs to "taper" off as you get to the edge of the mirror. I think you need to make some smaller heart punches and feather it offf.

Steve

Re: more Ukibori experiment

#4

Don Leydens

Looks great, John!


Re: more Ukibori experiment

#5

Re: I'll keep him busy...;)

John Lucas

Steve These are just rough experiments so I haven't actually done any designs as far as the layout of the hearts. I will experiment with other punches and may make one with a fixed depth stop to see how that works. I have to go by Tandy leather today and will look at the punches they have. I already own a ton but none that really fit the bill for this technique.

I'm toying with the idea of a raised large heart that I carve and then the small hearts will be on it using the Ukibori technique.

Re: more Ukibori experiment

#6

Old Woodwork magazine article might help

Craig Daymon

John,

There was an article in Woodwork magazine (before it was, very unfortunately, sold to American Woodworker) about netsuke, those small, detailed, Japanese carvings that the cords to their robs would pass through. This is a common technique for those carvings. Might be some info in that article. I vaguely remember something on it. (I think they were using it to put warts on a frog.)

Sorry, I don't recall what issue.

-Craig

Man! I really miss that magazine. Reasonably priced and great content with articles that sometimes ran 15 pages or more.

Re: more Ukibori experiment

#7

Re: Old Woodwork magazine article might help

John Lucas

Craig I have most of the issues. I'll try to remember to look it up tomorrow. I won't get home tonight until about 11 PM. I 'm doing a demo for the TAW on offset mirrors and will add a touch of Ukibori

Re: more Ukibori experiment

#8

Re: more Ukibori experiment

adrien

John,

What's the big deal?

I get the same ukibori effect every time I slop finish on my bowl rims. I get a scattering of bumps all along the sides of the bowl top without even trying. ;-)