Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

Great old wood turning video

Posts

Great old wood turning video

#1

Great old wood turning video

Richie C

I came across this video on youtube while looking at some woodcarving vids.

Its titled ,Wood carving in Germany 1926. It shows a wood turners process from start to finish in 1926.Very interesting. Wood selection,bowl prep, tool sharpening ect.ect.

search on youtube; WOOD CARVING IN GERMANY 1926

Re: Great old wood turning video

#3

He didn't show how he plugged the hole

John Lucas

in the bottom. His tools were sharpened at a fairly acute angle but he gets around this by cutting from the middle out and top down to hollow the bowl. Then of course cleans it up with a short hook tool. Very interesting.

Re: Great old wood turning video

#4

Re: He didn't show how he plugged the hole

Richie c

Your right! But other than cutting down the tree,It was all there. What surprized me was the wood worm on the lathe.

I guess not to much has changed since the 1920s.

Re: Great old wood turning video

#5

Re: He didn't show how he plugged the hole

Dale Bonertz

Don't let MM on another forum see this. He argues that the continental gouge was used in the old days but not in the manner this fellow used them. Never flute up according to him. Also he wouldn't like the screw for a pin chuck is much better - again his opinion.

Goes to show there are lots of ways to turn a bowl. Cool video.