Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

Throw away your Craftman 1/8" parting tool *LINK*

Posts

Throw away your Craftman 1/8" parting tool *LINK*

#1

Throw away your Craftman 1/8" parting tool *LINK*

John Lucas

I love mine. I've had it for years. They are wonderful tools. Well I just got one of the Thompson 1/8" parting tools. I had the chance to use it this weekend. Man is it sweet. My Craftsman will have to go in the drawer now. The one thing I didn't like about the Craftsman was having to sharpen it almost every usage. Didn't use the Thompson a whole lot yesterday but base on my experience with his other tools it will hold an edge far longer than the Craftsman.


http://www.thompsonlathetools.com/

Re: Throw away your Craftman 1/8" parting tool *LINK*

#2

Mike Stafford

Re: Throw away your Craftman 1/8" parting tool

Mike Stafford

I am sure it cuts as you describe but I am not going to throw away my bucketfull of Craftsman parting tools. Besides they are 3/32" thick and diamond shaped. I love that combination. The ones I have are HSS. Some were high carbon steel and they did not hold an edge.

Don't tempt me Doug with a diamond shaped 1/8". I would really like one of those.

Re: Throw away your Craftman 1/8" parting tool *LINK*

#3

John,

GaryG in MD

Explain, please -- I just looked on Doug's site and see that it's listed as being made from a 1/2" round bar. How does that work? I can't picture the shape of the tool. Isn't 1/2" pretty light duty? ...GG

Re: Throw away your Craftman 1/8" parting tool *LINK*

#4

Re: John,

John Lucas

It' is 1/8" wide and 1/2" thick. the tang is 1/2" or actually very slightly larger because the rear 3" or so has been turned to 1/2" Seems very stiff when I use it. If I have time tomorrow I'll cut something thick just to see how it does. today I was cutting 1" thick pieces and it cut like butter.

Re: Throw away your Craftman 1/8" parting tool *LINK*

#5

Re: John,

GaryG in MD

I sometimes take a parting tool in a fair distance -- say 4". Seems like a 1/2" tool wouldn't work well that far off the tool rest. Most parting tools are at least an inch wide, if not more. What am I missing? ...GG

Re: Throw away your Craftman 1/8" parting tool *LINK*

#6

Bob Moffett

Re: Throw away your Craftman 1/8" parting tool

Bob Moffett

I got one of Doug's 1/8th inch parting tools at the Virginia symposium. I really love it!! It works great!

Re: Throw away your Craftman 1/8" parting tool *LINK*

#7

Bob Moffett

Re: Throw away your Craftman 1/8" parting tool

Bob Moffett

Mike, you need to cut loose of some of that money that you have and get one of Doug's parting tools. They work great and stay sharp.

Re: Throw away your Craftman 1/8" parting tool *LINK*

#8

Don Leydens

Re: Throw away your Craftman 1/8" parting tool

Don Leydens

I second that commotion. The Thompson works terrific.

Re: Throw away your Craftman 1/8" parting tool *LINK*

#9

Re: John,

John Lucas

Gary I frequently cut pretty deep also but I usually use my older no name 3/16 diamond parting tool. I will compare the two and let you know.

Re: Throw away your Craftman 1/8" parting tool *LINK*

#10

Re: Throw away your Craftman 1/8" parting tool

Mike Gibson

l purchased one at the TAW symposium and like you John had a diamond shape Craftsman and l cannot believe how well the new one cuts. l will never go back. l also like the round shaft which makes it easy to fit into handles.

Starting to feel like l am on Dougs books with the praise l keep giving him. :)

Michael