Wish I could see a close up of the knife used for coring. It looks like a fairly large blade mounted at a downward tilt. I can't see the tip to find out how it gets clearance for the holding fixture.
While I've certainly turned many with that orientation, I prefer it reversed (bowl rim near the bark/sap wood) as I believe I get better figure in the finished product. It does 'waste' wood, and that's what a production shop doesn't want to do though.
This video was shot at the Holland Bowl Mill (they have a web site) in Holland, Michigan. It resides about 2 miles from my house. Most of their machinery is custom made. I had a tour several years ago, and have forgotten most of what I had seen. I do recall them saying there used to be over 100 bowl mills in Michigan, and that they are 1 of 2 mills remaining. They sell mostly in bulk to stores and other crafters that evolve them into other products. All bowls are cut green, dried thru an Autoclave and time, then finish sanded in their slightly oval fashion into finished products.
They moved from a location in town about 10 years ago, scrapping most of their old flat belt driven machinery (missed that opportunity by a few days).
Their bowl lathe foundation is an old Warner Swasey turret lathe from the 1940's. Turret lathes were designed for heavy production metal turning, and are built like battleships. Fixtures were developed over time into what was seen on TV.
I'd have to see if I can make my way in there again, and see if they'd let me photograph their coring rig in detail.