Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

Going to have to make a list

Posts

Going to have to make a list

#1

Going to have to make a list

John Lucas

I packed everything up for my demos yesterday. You would think I have the mirror demo down pat. I was laying in bed this morning and remembered 3 things that were fairly crucial that I needed to bring. I probably could have made it without them but man is it going to go smoother now that I have the tools.

I'm guess I'm getting old enough that I need to make a list of necessary items for each demo so I don't leave something crucial.

At the last AAW symposium where I did the Gift ornament I brought the wrong jaws for my chuck. I had already cut the tenons for the piece on the demo when I realized it. I had brought my 3" jaws instead of 2". I had cut the tenons by eye and one was just barely large enough for the 3" jaws to grab. The other was just a hair small. Duct tape to the rescue. They had used Duct tape to tape all the power cables to the floor so I pulled some up and wrapped 2 layers around the piece and finished the demo.

When doing a demo for the Palmetto woodturners I forgot my chuck key. Fortunately it is a standard 10mm allen wrench and they meet in a huge woodworking store that had 10mm wrenchs so the demo was saved.

Hate it when I do that. I guess I'll find out by the end of the weekend anything else I might have forgotten for these demo's.

Re: Going to have to make a list

#2

Alan Zenreich

Re: Going to have to make a list

Alan Zenreich

John,

When I unpacked from our latest demo, I made photos of the packing.

This way, for the next demo, not only do I know what was packed, but how I organized, packed and transported all the toys... errrr, tools and supplies (many tiny items arranged in clear divided boxes).

I tend to bring a lot of "stuff" to our local demos... I have to rethink what we're going to bring for our demo at AAW in Tampa.

Re: Going to have to make a list

#3

Alan Zenreich

Re: Going to have to make a list

Alan Zenreich

Also there are considerations when you don't know what kind of lathe you'll be working on.

For example, I need a draw bar for a mandrel I use. I've built a few of them to work on specific lathes, but am also ready with an adjustable version.

What is harder is using specialized tool rests. I like using a flat top "box" rest for certain cuts, but don't know the tool post length or diameter appropriate to some upcoming demo lathe. This is not the type of item that one would expect to be supplied by the demo venue, so if I want to show its use (and I do), then it's up to me to be prepared for pretty much any lathe I might be assigned to.

Fun stuff! Then again, I actually enjoy thinking about how to make configurations more flexible.

Re: Going to have to make a list

#4

Re: Going to have to make a list

Jeff Brockett

John, good thing that Woodcraft is right around the corner from where the symposium is being held!

Re: Going to have to make a list

#5

Alan Zenreich

Re: Going to have to make a list

Alan Zenreich

I forgot to mention that I rather like the Packing Pro app on an iPad or iPhone to create packing lists. Very flexible app, and can share among the devices.

Re: Going to have to make a list

#6

Re: Going to have to make a list

Don in Central Illinois

Don't feel bad, I had a checklist for equipment when I shot weddings. Sometimes week to week. But having to unpack and use the same equipment during the week, I made sure I didn't miss anything.

Re: Going to have to make a list

#7

Re: Going to have to make a list

Randy Gleckler

I'm sure you'll have 1 or two guys in the crowd that will help you remember what you missed. ;-) Since many will be "local" to you.

Re: Going to have to make a list

#8

Rob Wallace

Making a list.....

Rob Wallace

Hi John:

I use a list "tool" similar to those we have developed when repeatedly prepping some of our introductory Biology teaching labs to make sure we have everything ready for student use. Over the past few years I've found my "turning demo checklist" to be very helpful to have it as part of my traveling toolbox (make sure the list is sized to fit conveniently in whatever container(s) you normally bring). If you do a fair number of demos, this is a very useful item to have.

Once you have determined the list of the basic "stuff" that you need for doing your demos, you print the list onto card stock, and then have it laminated between layers of plastic (copy centers can do this fairly inexpensively). Leave a blank area on the list to add any special tools/supplies for a particular demo being done. You can then check-off this same list over and over each time you are getting ready for doing another demo by using either a dry-erase pen or a Sharpie marker (re-use by simply washing off the check marks with alcohol when needed). This serves the same function as a pilot going through a 'pre-flight checklist' - it has saved me many times when I would have forgotten to bring something critical to the demo I was doing. (There is truth to the expression "absent-minded professor"!) Investing a small amount of time into making one of these re-usable lists saves time in the long run, and provides an immediate check that you have everything before you leave.

I also always bring my "traveling" Vicmarc VM-100 chuck (which never leaves the demo tool box) for which I carry 3 inserts for 1"x 8, 1.25" x 8, and M33 x 3.5 spindle threads, which accounts for over 90% of the lathes one would ever encounter doing a demo. I always have two sets of jaws with me (one on the chuck) if I need to change sizes in a pinch. I agree with the comments that accommodating the the tool rest situation is a bit more problematic if you use specialty rests. It's impossible to bring EVERYTHING, but after a few years of doing demos (and learning what would have been good to have or what I needed to borrow), I am comfortable that my tool box has most of the tools I might need, even some of the non-turning ones (folding pull saw, adjustable wrench, mini-socket wrench set, Allen wrench set, mallet, mini-vise grips, a "one to three" grounded 3-prong electrical adapter, electrical tape, 3/4" chisel, 4-in-one screwdriver, etc.).

It took me a while for this to become second nature, but whenever I am now asked to do a demo, I remember to ask what lathe I'll be turning on, and write that information down with the details of the date, time, and place/directions. It's not much fun to be surprised when you get to the demo location, and you are unfamiliar with the lathe you'll be turning on.

Have fun at your demo!!!

Rob

Re: Going to have to make a list

#9

Re: Going to have to make a list

John Lucas

we had lists at work for the equipment we needed for Graduation or trips to the Craft Center. Both of those tended to be camera and light intensive and it was easy to leave important things behind.

Re: Going to have to make a list

#10

Re: Going to have to make a list

John Lucas

Jeff I'm going to Woodcraft before the hotel so I will have to anticipate my needs. That's a quick way to say I'm probably gong to buy more than I planned to buy. :)

Re: Going to have to make a list

#11

Rodney has already told me there will be hecklers


Re: Going to have to make a list

#12

Re: Making a list.....

John Lucas

Rob I have learned to bring a set of both metric and american allen wrenches and usually travel with a miltitool as well. I've had to do minor lathe repairs when I went to a couple of demo's.

I also bring adaptors for my chucks for any lathe. Twice I've been told I would have one lathe and got there and had a different one. Would have been trouble some if I didn't bring those adaptors. I've also learned now to bring a #3 to #2 morse taper adaptor for Oneway lathe tailstocks. Had to send my room assistant down to the vendor area to get a drill chuck with a #3 morse taper when I realized that I was doing the demo on a Oneway instead of the Stubby they originally told me.

Re: Going to have to make a list

#13

Rob Wallace

THANK YOU JOHN......

Rob Wallace

......for alerting me to the fact that I don't (yet) have a MT2 to MT3 adapter!!!

I'll need to get one and add that to my toolbox!

Have a great day!

Rob

Re: Going to have to make a list

#14

Don't' forget the drift punch *LINK*

John Lucas

Otherwise you will never get your live center out of the morse taper adaptor. Damn my list is getting longer each day.


http://www.grizzly.com/outlet/Morse-Taper-Sleeve-3-to-2/G1430

Re: Going to have to make a list

#15

Re: Going to have to make a list

Bob Salvetti

Hey John,

Please don't forget anything for the demo for us in Columbus, GA on March 9, 2013.

Keep up the great work, and many thanks for all the info you share with us.

Re: Going to have to make a list

#16

Nooooooo..... That wouldn't happen would it  ;-)


Re: Going to have to make a list

#17

Dick Hines

Re: Going to have to make a list

Dick Hines

When I do a demo. The day before I will do what ever I am going the next day at the demo. I write down every step and tool I use to turn the test piece. So far it has saved me from leaving some important tool home.

Re: Going to have to make a list

#18

Jesper, Denmark

Re: It goes with the territory.....

Jesper, Denmark

Once we advance to serious adulthood, lists become necessary.

Just don't forget where you put the list 8)

Re: Going to have to make a list

#19

Re: It goes with the territory.....

Harry B. Pye

Also make a second check list to use when gathering up your tools before leaving after the demo.

Re: Going to have to make a list

#20

Re: Going to have to make a list

Don Wilcut

John, after retiring, you make lists of your lists.

Don

Re: Going to have to make a list

#21

I'm demoing in Columbus.....?

John Lucas

Yea it's on my calendar. I must have ADD or some other problem but I'll go through the demo in my mind and pull out the tools and other necessary gear, but somehow my mind will sorta skip ahead and miss something.

If it's a demo I haven't done in a while I will actually make the piece but I have such a habit of putting things back where they belong after I finish each tool that I still forget. I guess I'm either too lazy or think I don't need to make a list while I'm actually turning the item. I guess I'm wrong.

I envy people like John Jordan who can do most of his incredible work with something like 4 tools. I guess I'm just a tool intensive kind of guy. I do often bring extra tools with me to show how the cuts work with a different grind or different steel.