Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Exotic Hardwood, Personally Sourced Worldwide. Inspected at Origin. Shop Rare Stock.

Did YOU Know That . . .

Posts

Did YOU Know That . . .

#1

Did YOU Know That . . .

charlie belden

if you rest a piece of wood that has what appears to be a shallow crack in it - on top of your tail stock - and squirt some thin CA glue in that crack . . .

it's possible

to super glue

either

the tail stock spindle

and/or

the screw that locks the spindle

to the spindle body?

DAMHIKT (Don't Ask Me How I Know This)

BTW - "Decure" applied to the glued parts PLUS applying a heat gun to the spindle body PLUS a pair a channel locks solves the problem.

Got a CA Glue Story (preferabbly one that happened to someone else?

Re: Did YOU Know That . . .

#2

I am LOL...

GaryG in MD

Charlie,

LOL!

I can just see it.

Nothing about CA would surprise me!

That stuff is nefarious and insidious! DAMHIK!

I have an iron-clad rule here that I will not open a bottle of CA without first putting on nitrile gloves on both hands. I have had so many previous instances where I just KNEW that it would be IMPOSSIBLE for me to get any on my fingers, given what I was about to do, and yet...

And that rule has since held me in good stead, because, more than once...

I also make a point of working on newspapers, and have 'stiffened' many layers with no initial intent.

Glad you got it freed up, GG

Re: Did YOU Know That . . .

#3

Harry Robinette

Re: I am LOL...

Harry Robinette

Not sure about the year but the Cincinnati symposium I believe it was 2005 or 07

Bonnie Kline CA'd her hand to the top of the head stock while answering a question from the audience.As usual this was fun for the rest of the symposium.