Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Price drop on over 1300 Rockler items

Mahoney's Walnut Utility Finish

Posts

Mahoney's Walnut Utility Finish

#1

Mahoney's Walnut Utility Finish

Stuart Johnson

How long does it take for this to cure indoors around 70 degrees?

Re: Mahoney's Walnut Utility Finish

#2

Re: Mahoney's Walnut Utility Finish

John Lucas

I have my house set at 70 and it seems to dry overnight. I apply a new coat each day when I use it.

Re: Mahoney's Walnut Utility Finish

#3

Re: Mahoney's Walnut Utility Finish

Bernie Weishapl

After 2 or 3 coats I let them dry for a week and I always put them where there is a lot of sunlight since Mike told me at one of his demo's that sunlight helps cure it.

Re: Mahoney's Walnut Utility Finish

#4

Joe Fleming

Re: Mahoney's Walnut Utility Finish

Joe Fleming

What Bernie said. Also, do not submerge the piece in the oil. If you saturate the piece it will take forever to dry. Wipe on and wipe off. Joe

Re: Mahoney's Walnut Utility Finish

#5

Re: Mahoney's Walnut Utility Finish

robo hippy

I slop it on, let it sit for an hour or so while I sand and finish another bowl or three, then wipe on some more. I prefer to let it sit for a day or two, then a final wipe down. It does take a week or so to cure to the point where it won't leave oil rings on the table cloth, but is dry to the touch in a day or so. I have sped the process up by putting the bowls on a wire rack over a 40 watt bulb.

robo hippy

Re: Mahoney's Walnut Utility Finish

#6

Thanks for the replies.

Stuart Johnson

It sounds like the best thing to do is set the bowl aside for a week and let it cure. I do like the soft look the oil gives.