Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

Cherry/Ambrosia Maple box

Posts

Cherry/Ambrosia Maple box

#1

Cherry/Ambrosia Maple box

Roger Chandler

Cherry/Ambrosia Maple box

This is another I did today for the demo next week. I did not have enough cherry to make a lid for it, and I thought the ambrosia maple would be a better contrast than walnut on this cherry, but it is a bit bland for my tastes..........I like combinations that pop, but this one is okay. Sometimes one just has to use what they have on hand!

Size is 5-1/2" wide and 4.75" tall at the knob. Still have a bit more finish work to do on it after the Woodturers finish cures out..........comments always welcome!

Re: Cherry/Ambrosia Maple box

#2

Woodturners Finish on cherry

Dick Coers

It really comes off cold on cherry. I haven't even liked what it did to white oak. Tried the finish, stuck it on the shelf, won't ever get it back off. Very nice box, but some solvent based material may have given you more of the "pop" you were looking for.

Re: Cherry/Ambrosia Maple box

#3

Re: Woodturners Finish on cherry

Roger Chandler

Dick........I did not mention it in the first post, but I did put a coat of dewaxed shellac on before the woodturners finish. The can I am using at present of the Woodturners finish is about 3/4 gone.......I don't know if it was the temps today in my shop compared to when the can was new, but when new, I got a better result.

I took a lot of extra pains with trying to sand this and perhaps I went a bit overboard on it with some synthetic steel wool scotch brite pads......I went from the burgundy color all the way through the gold......usually this helps the finish to be smoother, but this piece was not great.

I wonder if a lot of evaporation has occurred with my can and now it is not as good as when new? I do have a new unopened can to replace it, however.

Re: Cherry/Ambrosia Maple box

#4

Re: Woodturners Finish on cherry

John Lucas

Roger The Cherry will age with a much darker patina so if you wait a few years you may have what you want. You can of course speed up the process by putting it in direct sunlight. Of course in Tennessee you won't have any for the next several days.

Re: Cherry/Ambrosia Maple box

#5

Re: Woodturners Finish on cherry

Roger Chandler

You are correct John.....the cherry will darken .....I have seen cherry darken in two weeks.........a lot darker in a year.

Thanks!