Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

Double Maple Spiraled Bowl

Posts

Double Maple Spiraled Bowl

#1

Bob Moffett

Double Maple Spiraled Bowl

Bob Moffett

I was doing a demo on turning & carving a spiral bowl when someone asked what it would look like if I carved double spirals in the bowl. We decided to try it and see what developed. The bowl has six spirals carved in each direction. The rim and the medallion in the foot are textured, the rim with a Wagoner texturing tool and the medallion in the foot with the red small Sorby texturing tool and spiraling tool. I also textured a medallion in the center of the bowl using the small Sorby texturing tool. The bowl is ambrosia maple and is 9 ½” in diameter and 3 ½” tall. The base is 4” and at the depth of the spirals the bowl is ¼” thick. It is finished with 3 coats of Waterlox satin sealer and 3 coats of Waterlox gloss and then buffed with a Beal buffing system. C&C welcome and appreciated.




Re: Double Maple Spiraled Bowl

#2

Leo Cuellar

Re: Double Maple Spiraled Bowl

Leo Cuellar

Looks beautiful, Bob. Your recent posts have "inspirational" !

Re: Double Maple Spiraled Bowl

#3

Don Leydens

Re: Double Maple Spiraled Bowl

Don Leydens

Hello Your Spiralness!

Wonderful piece, Bob! Those are some nice looking cuts in there. Plenty of sanding as well. Really nice piece, I'm impressed. Great texturing work as well. Keep 'em coming!

Re: Double Maple Spiraled Bowl

#4

Joe Bradshaw

Re: Double Maple Spiraled Bowl

Joe Bradshaw

Most impressive Bob. Almost looks like cut glass. You must own stock in a sandpaper company. Great job and a nice looking bowl.

Re: Double Maple Spiraled Bowl

#5

Re: Double Maple Spiraled Bowl

Bob Verne

Thanks for the kind comments guys.