Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

Got my new Vector Grind Jig.....long

Posts

Got my new Vector Grind Jig.....long

#1

Got my new Vector Grind Jig.....long

Dick Coers

Called JoHannes last week, and the vector grind fixture showed up on Christmas Eve. When I called him, he said he was just reading my post on WC about others using his fixture. Nice coincidence. Ground a 5/8" gouge today, and it put a huge smile on my face. Turned a 16" dia. x 6 1/2" deep soft maple bowl to test it out. I bought two Hannes gouges years ago, and since I had no confidence hand grinding them, they pretty much sat on the shelf. No longer! I'm also going to give credit to Doug Thompson, as this thing really cuts nicely! I had stacks of huge curls, to a pile of curls that looked like a wig laying on the floor. Spectacular! It looks like I will be taking the lead out of the handle to sharpen it though. That 5/8 gouge is 31 1/2" long, and it takes some muscle to hold it down in the length setting fixture, and then to lift it up and over while grinding. My second grind touch up was without lead, and it was much easier. With his expandable rubber handle plug, it's only a few seconds more to work with the lead shot. The pivot feels a little funny when you first set the holder leg in it, but then gets just right when you lay it over and get to the grinding wheel. I'm very satisfied, a really nice addition to the sharpening bench!

Re: Got my new Vector Grind Jig.....long

#2

Re: Got my new Vector Grind Jig.....long

Terry Quiram

You have to bring your gouges and fixture Saturday. Sounds very interesting.

Re: Got my new Vector Grind Jig.....long

#3

Re: Got my new Vector Grind Jig.....long

klowwn

Can you provide a link for the Vector grind jig?

Thanks

Ricc Havens

Re: Got my new Vector Grind Jig.....long

#4

Re: Got my new Vector Grind Jig.....long

Jeff Brockett

I purchased the Vector Grind Jig last August and use it all the time. Nicely made and does everything that it claims to do.

Re: Got my new Vector Grind Jig.....long

#6

Video is on his site- see link *LINK*

John Lucas

I think I will have to go to at least a 2" extension. The Wolverine jig just barely clears the wheel on side grind with 1 3/4" extension.


http://hannestool.com/products-overview/michelsen-grind