Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

Thanks, Steve!

Posts

Thanks, Steve!

#1

Thanks, Steve!

GaryG in MD

Steve Antonucci came down from his home in upper NJ yesterday to provide a demo for Montgomery County Woodturners in Rockville, MD. And what a demo it was!

In 90 minutes, just as advertised, Steve forged a hook tool from a metal rod, hardened it, ground it, sharpened it, turned a handle for it, and used it for end-grain hollowing while making a small box, and gave "hands on" instruction in its use to three members, at the same time. Now that's what I call a Demo!

Highly recommended to one and all. Sign him up!

Thanks Steve. That was great fun. ...Gary

Re: Thanks, Steve!

#2

Alan Zenreich

Re: Thanks, Steve!

Alan Zenreich

sounds like a fine session, and a lot of fun.

Re: Thanks, Steve!

#3

Re: Thanks, Steve!

Chuck Engstrom

What kind of metal stock was he using?

-Chuck

Re: Thanks, Steve!

#4

Steven Antonucci

You had to be there 


Re: Thanks, Steve!

#5

Steven Antonucci

1045 stainless, but it's not that important


Re: Thanks, Steve!

#6

Steven Antonucci

Appreciate the kudos, Gary.

steven antonucci

I enjoyed your gang, and I am glad that the demo went well and folks enjoyed it. Tell Amy that your facility gives the shop at Peters Valley a run for the money as far as facilities go. Anything I forgot to bring was available, and at the ready...

It's always fun to stand up in front of a group of woodturners and show them what I know and hopefully transfer some of it to the ecosystem. I also met a few WoodCentralians and a whole bunch of WC lurkers. Feel free to post from time to time guys, everyone is welcome here!

If anyone is interested in dragging me down to their clubs to demo, I'd be happy to discuss...

Now, to go unpack my anvil...

Steve

Re: Thanks, Steve!

#7

Re: Appreciate the kudos, Gary.

Tim Aley

Very fun time Steve! Great job!

And the space should get even better when it doubles in a couple of months!

Tim

Re: Thanks, Steve!

#8

Re: Appreciate the kudos, Gary.

Jerry Klug

Steve, since you probably not going to be in the Terrebonne, OR area soon, could you post a photo of your hook tool? One of the woodworkers in our Central OR area also has a complete blacksmith shop. I would like to try making a hook tool but I'm not sure of the shape to try for.

Thanx.

Re: Thanks, Steve!

#9

Re: Appreciate the kudos, Gary.

Don in Central Illinois

Steve, if you had a handout that you used, could you post it here or email? I would like to make one, too.

Re: Thanks, Steve!

#10

shape

GaryG in MD

As soon as we get the pix off the cameras and a web album created, I'll post the link. I'm not sure if we got a closeup of the tip of the tool, however... perhaps. I know I got the good drawings on the flip chart.

Think about it as about 1/4" of the tip of a bowl gouge cut off and welded to a rod on the side of one wing. And that's the way it cuts too. ...Gary

Re: Thanks, Steve!

#11

I'll tell her