buying wood
Keith Tompkins
Many times we as woodturners celebrate when we acquire wood for free. I'm just curious, how many turners buy wood on a regular basis? Why?
Knowledge You Can Build On — Est. 1998
buying wood
Keith Tompkins
Many times we as woodturners celebrate when we acquire wood for free. I'm just curious, how many turners buy wood on a regular basis? Why?
Re: buying wood
Nick Todd
For a variety. Any kind of burl is hard to find in our local species. There is no red palm available in northern California.
Cost - There are a couple vendors that have free shipping on some of there specials. Fuel for chains saws & trucks has to be figured into your cost.
Re: buying wood
David Walser
Keith,
I buy much of the wood I turn. There are several reasons for this, in the order they occur to me:
* I live in Arizona, land of few trees. We have mesquite, palo verde, and a few other native and imported varieties, but not any in the kind of abundance found in other climes.
* Time. I work 60 hours a week as a CPA. Gathering wood and cutting it into blanks takes a lot of time -- time I'd rather spend at the lathe.
* Variety. As mentioned above, there's not a wide variety of trees in Arizona. If I want to turn maple, cherry, or walnut -- let alone "exotics" -- buying is about the only option.
* Quality. What free wood there is is of indifferent quality. Some it is great, some pretty poor, most of it is just average. Buying offers a more consistent, higher average quality. For a "special project", it's far easier to get the right blank by buying rather than sorting through a mound of free wood. Since my time at the lathe is so limited, most of my projects are special (if only to me).
If I were a production turner, trying to make my way by selling my work, things would be far different. Free wood would reduce production costs, perhaps making the difference between profit and loss. At any rate, buying would greatly reduce the amount I could make as a turner. I don't sell my work and time is more precious to me than money.
Re: buying wood
Bernie Weishapl
Like David I buy a lot of wood because most of our wood is Elm, honey locust and cottonwood. Here our biggest cherry is maybe 6" to 8" in diameter. Apple, pear, etc is much bigger. Very little walnut so if I want anything different it is bought. I have been turning about 7 yrs and got some silver maple the other day. I search for wood and have arborist contact me if they get anything nice. This was the first time since I have been turning to get some maple out here.
Re: buying wood
John Lucas
Keith My mirrors are done with dry wood and the exotics sell better so I buy that stuff. I have been working on drying my own but so far all I've gotten is plain uninteresting stuff.
I do buy exotics from time to time to use for boxes.
I have never purchased a bowl blank or hollow vessel blank.
Re: buying wood
Pete in Holland, MI
Too much red oak, white oak, cherry, walnut, maple, beech, hicory, and other woods in the area to play with (gotta love SW Michigan !). A couple contacts with local tree services and my network of friends yields me all the wood I need for a few bowls or a 12 pack or two in return.
Too cheap to consider buying any exotics, and having plenty of fun with what I find within 10 miles of my house.
I pitty you turners far away from the source.
Pete
Re: buying wood
Mike Stafford
I buy exotics for boxes because the exotics sell better than the domestic woods. I also find that the exotics turn better than the domestic woods.
I have turned boxes from more than 200 species so I am non-descriminatory but I do prefer the more dense species.
Only kiln dried hard maple
steven antonucci
As a Northeasterner, I live in a land of trees and plenty. I typically acquire wood an entire tree at a time, and as such, commonly use cherry and walnut for demos. After the recent events with Sandy, I am actually overwhelmed with the number of trees I would have normally jumped at taking, and much of the wood lays where it fell.
Turning locally available stuff appeals to the cheapskate in me, as I put wood on the ground liberally without feeling like I need to "maximize" everything I turn.
My one great weakness is for good hard maple. If I see a pretty stick of bird's eye maple, I pretty much have to buy it. Same with quilted or good curl. For the smaller stuff I make at demos, I also like to have some available. All of the maples in our area are buggy (dang ambrosia beetles!). So I pay for it...
Steve
Re: buying wood
Don Orr
Most of the time I only spend money on exotics that do not grow in my area. Once in a while if something really special comes along locally I might spring for it. I usually work with local domestics that I get for free and give back a bowl or gift of some sort. For the exotics there is a wholesale place not too far from here that some friends and I take a "field trip" to every couple of years and stock up. They have some REALLY cool stuff and they give us good deals. They sell their scraps and offcuts by the pound too. I will also buy interesting wood at shows and symposiums if it strikes my fancy.
I need to turn more-I have a LOT of wood.
Re: buying wood
robo hippy
It is about half and half for me. I get a lot of wood from local arborists. I generally don't like to see trees cut just for wood. I do make the exception for Madrone, my favorite wood. In the forests around here it is considered junk because it is too difficult to dry, and the big lumber companies don't want to fuss with it. It ends up getting cut because it is competition for the big money trees (doug fir and cedar) and put in the chip/fire wood pile. Found a guy who will bring me logs and drop them off in my drive way for less than I could go and get them for. I also bought a pallet load of maple baseball blanks. Great for rolling pins and lots of small projects. Don't mess with exotics much.
robo hippy
Re: buying wood
Bob Lalonde
We have a timeshare in Kauai so I buy Koa there and ship it home. Very expensive but I can't help myself.
There are a lot of conifers here in No Western California (Redwood, Pine, Fir) that I don't turn and harder wood is less common with the exception of Pacific Maple, Madrone and Bay Laurel (Pepperwood or Myrtle depending on where you live). I love the Pepperwood and have a good supply of it.
I am a "hobby turner" so don't buy much.
Re: buying wood
Dick Hines
All my boxes are tuned form Australian burls. Since they are small compared to a bowl I like the have the wow factor of the Australian woods.
I also will buy some BLM burl once in a while. Not cheap either but I have sold every piece i have turned form BLM burl.
Re: buying wood
Keith Tompkins
The reason I ask is, I often buy wood for specific projects; holly for white, ebony for black, etc.. I don't often turn "on the fly", so each project is planned, the the wood then sourced. Instead of finding a nice piece of wood, then deciding what to do with it, I plan the work, then find the appropriate wood. I just received a spectacular piece of bigleaf maple burl/quilted I purchased on ebay..(thanks to all who gave me sources!) Something special in mind 
Re: buying wood
Mike Foster
Keith, I work very similar to you. I have a very specific design in mind before searching out the wood. I do have a collection of blanks, including burls and the like, which I can often find the right piece of wood to fit my needs. Some of the pieces I do, I can use most any wood, so will take it from wood that I get from our land. Other times I require that special piece of wood and it will lead me on a search for the right piece. Like you, the design for me is the driver, not the wood. So I buy wood like burls and exotics, but will use free maple if the project will allow.
It depends on what the definition of "is" is
George Guadiane
By that I mean there is retail buying and wholesale buying.
I am HAPPY to pay (in wood) for leads to good wood sources and content to pay for wood I cannot easily get by any other method.
FOR INSTANCE, I have driven almost three hours twice (so far) since I moved to Florida to buy van loads of East Indian Rosewood (sisso) from a guy who has a gazillion board feet of it and keeps getting more.
I paid $120 for 12 BIG (10X6 and bigger) and numerous smaller pieces once I process the log pieces down to blanks...
I was able to select the pieces I wanted and cut them the way I wanted (got a few FINE crotches). It's hard for me to turn down that kind of quality for so few dollars
I also buy at club meetings and at garage sales where I have gotten ASTOUNDING deals - AND, every now and then, a turner's estate pops up and the family asks for donations - what can one do??? PAY UP!