Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

Using Jointer to flatten bowl bottoms. *LINK*

Posts

Using Jointer to flatten bowl bottoms. *LINK*

#1

Using Jointer to flatten bowl bottoms. *LINK*

John Lucas

This video scared me to death when he fed the bowl through the jointer. If it had tilted down as he fed it he would have less fingers than he has how. I give him credit for all the various techniques he came up with to shape the bowl but I sure would like to spend some time with him to show how to use bevel rubbing tools. It sure would have been faster and cleaner.


http://www.youtube.com/watch?v=6Yd0VamRvQ8

Re: Using Jointer to flatten bowl bottoms. *LINK*

#2

Re: Using Jointer to flatten bowl bottoms.

DickL in Tampa

Yes. That jointer action scared me too. I like having all my fingers.

Re: Using Jointer to flatten bowl bottoms. *LINK*

#3

Re: Using Jointer to flatten bowl bottoms.

Don in Central Illinois

When I saw how he was pushing it through the joiner, it scared me too.

Re: Using Jointer to flatten bowl bottoms. *LINK*

#4

Mike Stafford

Re: Using Jointer to flatten bowl bottoms.

Mike Stafford

It appeared to me that he was using carving tools to turn the bowl.

I don't believe he has had any turning lessons......

I shuddered when he jointed the bowl bottom.

Re: Using Jointer to flatten bowl bottoms. *LINK*

#5

Re: Using Jointer to flatten bowl bottoms.

Barry L Elder

I'm not going to look at the youtube. It's too easy to flatten the bottom using the extended jaws on the lathe, :D unless you turn green wood that moves.

Re: Using Jointer to flatten bowl bottoms. *LINK*

#6

Re: Using Jointer to flatten bowl bottoms.

John Lucas

Mike I think it was a traditional spindle gouge like used to come with the Craftsman sets but I wasn't sure. It didn't matter he used it as a scraper. :)

Re: Using Jointer to flatten bowl bottoms. *LINK*

#7

Lyle Jamieson

Re: Using Jointer to flatten bowl bottoms.

Lyle Jamieson

He should have used his radial arm saw instead of the jointer to take the bottom off.

Re: Using Jointer to flatten bowl bottoms. *LINK*

#8

Bob Moffett

Re: Using Jointer to flatten bowl bottoms.

Bob Moffett

I must admit that I have never seen so many potiential disasters combined into one woodturning video before. Some people survive in spite of themselves.

Re: Using Jointer to flatten bowl bottoms. *LINK*

#9

Re: Using Jointer to flatten bowl bottoms.

Carole Valentine

Ditto!

Re: Using Jointer to flatten bowl bottoms. *LINK*

#10

Re: Using Jointer to flatten bowl bottoms.

robo hippy

He knows just enough to complete the project, but not enough to realize how dangerous most of what he did was.

robo hippy

Re: Using Jointer to flatten bowl bottoms. *LINK*

#11

Keith Tompkins

Re: Using Jointer to flatten bowl bottoms.

Keith Tompkins

I had to post a comment there. Foolish using the bandsaw or jointer. Unbelievable he showed the jointer being used that way...good way to lose both hands.

Re: Using Jointer to flatten bowl bottoms. *LINK*

#12

Re: Using Jointer to flatten bowl bottoms.

Cyril Griesbach

I lost count on how many turning things were done improperly in this video. And of course the dangerous things didn't go unnoticed either but I have to give the guy some credit for finding ways, however unsuitable, to solve his challenges.

He needs to run into a guy like I did at my nearby Woodcraft store who said

"Cyril, why don't you join the woodturning club?" To which I replied "there's a WOODTURNING club?!!!" It was the best woodworking advice I ever got.

Re: Using Jointer to flatten bowl bottoms. *LINK*

#13

Dick Hines

Re: Using Jointer to flatten bowl bottoms.

Dick Hines

I very seldom watch youtubes of people doing turning. Most of them have so much wrong things that people do to get a bowl turned.

I wounder how many people get serious damage the them selves that we never hear about.