Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

Looking for chainsaw advice for infrequent user

Posts

Looking for chainsaw advice for infrequent user

#1

Looking for chainsaw advice for infrequent user

wilbur

I'm in the market for a chainsaw. I've read the threads on chainsaw buying advice, which has been a big help, but I have a question that I didn't see addressed. Based on my experience, I'll probably be using this chainsaw very infrequently, like once a year. Are there any issues I should be thinking of given that the motor won't be run very often?

In case anyone's interested, I'm looking at a Stihl, probably an MS 211 or the MS 250.

Re: Looking for chainsaw advice for infrequent user

#2

Bob Moffett

Re: Looking for chainsaw advice for infrequent use

Bob Moffett

You are looking at a good brand of chain saw. I would consider putting some fuel stabalizer in the fuel to help keep it from gumming up. You may want to run or drain the fuel out of it before you put it in storage.

Re: Looking for chainsaw advice for infrequent user

#3

Re: Looking for chainsaw advice for infrequent use

Cyril Griesbach

Wilbur, as much as you are deciding what saw to buy make sure to give very serious consideration to buying the safety equipment as well. This would include chaps and a helmet with face and hearing protection. And, I shouldn't have to say that tennis shoes don't fit the job either.

If your legs are not worth a hundred bucks then disregard this advice.

Re: Looking for chainsaw advice for infrequent user

#4

Re: Looking for chainsaw advice for infrequent use

wilbur

Thanks, Cyril. I already have the safety angle covered.

Re: Looking for chainsaw advice for infrequent user

#5

Bob has given you the best.........

JamieDonaldson

...advice about draining the fuel and running the saw dry before storage of any extended length. Even the use of fuel stabilizer is iffy with the current ethanol gas mixtures, so I use fresh high octane gas regardless of how long a tool has been sitting.

Re: Looking for chainsaw advice for infrequent user

#6

Ellis Walentine

Ditto the gas advice

Ellis Walentine

I think Stihl even tells you that you should use premium gas, preferably without ethanol. Drain the tank and run the saw out of gas before storing it. Use stabilizer in your jerry can if you're not using the gas for a few weeks.

I don't know how much play is built into these recommendations, but it pays to be on the safe side. Fuel lines and fuel are the source of the most common chainsaw problems.

Ellis

Re: Looking for chainsaw advice for infrequent user

#7

(Message Deleted by Poster)


Re: Looking for chainsaw advice for infrequent user

#8

Re: Once a year! Borrow one from a friend

Joe Dickason

I've got an electric for that very reason

Re: Looking for chainsaw advice for infrequent user

#9

Once a year- you don't need one

Jeff Willaford

You need a friend to come over and cut the wood for you. Unless you have a bucket full of experience behind you, using a chain saw once a year may not be the best choice. A chainsaw is not a casual tool in my humble opinion. Other than that...all the info provided is good stuff.

Re: Looking for chainsaw advice for infrequent user

#10

Dick Hines

Re: Once a year- you don't need one

Dick Hines

I am with Jeff. Dropping $300/$350 on a saw to use only once a year sounds like money down the drain.

Re: Looking for chainsaw advice for infrequent user

#11

I actually have an electric chainsaw.

wilbur

I actually have an electric chainsaw. I just seem to have gotten to the point that when I do need a chainsaw, either the electric chainsaw doesn't have the oomph that I need (yes, I did sharpen the chain, and I'm pretty sure I am doing it well enough) or the location precludes the use of an extension cord.

Re: Looking for chainsaw advice for infrequent user

#12

Steven Antonucci

once a year...rent one when you need it.


Re: Looking for chainsaw advice for infrequent user

#13

Re: once a year...rent one when you need it.

Barry Irby

I agree with all of the above. Get and Use the safety gear. Use and electric saw, they don't have fuel problems except when there is no electricity available. Use fuel stabilizer. Find a source for high test fuel without ethanol. (Airport or boat dock) Borrow a saw or rent one. For once a year use you can rent one forever for the price of a saw and let somebody else do the upkeep.

Re: Looking for chainsaw advice for infrequent user

#14

Re: once a year...rent one when you need it.

bill Crommett

Wilber: Barry has almost give the best advise, but to rent or borrow a chainsaw is not an option if you are caught in a storm and have a tree blocking your egress.

I have learned through many years of having chainsaws repaired that the modern 87 octane gasoline is made with dirty technology and so I now use high octane unleaded gasoline in all my outdoor power equipment with little attention payed to stabilizer except for a single application in the fall for equipment that will not be used for many months. And sometimes I think that is over-kill.

Your choice of the small/midsize Stihl is a wise one. I sold my big Stihl last year and bought a new one with the spring loaded starter. What a boon for an old man !

Re: Looking for chainsaw advice for infrequent user

#15

Dale Jablonski

Re: Looking for chainsaw advice for infrequent use

Dale Jablonski

Even if you presently are an infrequent user get the better saw you never know when your needs or desires will change. I also strongly recommend you get the DVD Stihl puts out that does an excellent job on education and safety when using the saw. I love my 361.

Re: Looking for chainsaw advice for infrequent user

#16

Guys, a little decorum, please!

David Walser

The man wants to buy a new tool. Suggestions that he borrow the tool or rent one when he needs it are misplaced. (Practical and sensible, but definitely misplaced.) It's up to every red blooded one of you -- male or female, American or not (tool lust knows no international boundaries) -- to support a fellow tool junkie in need of a fix! How would you like it if someone rained cold, reasoned, logic on your desire for a new lathe, gouge, exotic blank, or sharpening jig? Some things just aren't done!

If a man asks if he needs a new chuck, the answer is always "yes". Sometimes, it's "no, you need at least two more chucks", or, even "yes, you need a new chuck, but you ought to buy a passel of face plates, too". But, the answer is never, ever, "no, you don't need that new tool". We are here to support each other. Let's try to keep that in mind.

I'm sorry to get all forum monitor on you, but a man -- at some point -- has to take a stand.

Re: Looking for chainsaw advice for infrequent user

#17

Mike Stafford

Re: Looking for chainsaw advice for infrequent use

Mike Stafford

I am about as infrequent a user of chainsaws as anyone can be. I bought my chainsaw, a McCulloch Farm Boss, with a 20" bar in 1976. I used it a lot back then to cut wood for heating. At the end of every season I carefully ran the gasoline out of it, put some oil in the cylinder and put the saw in a case.

When we moved back to North Carolina I did not use the saw for quite a number of years. Finally a hurricane blew down some trees on my property and pulled the saw out, put fresh gas and oil in it and it started right up, not on the first pull but after a few pulls. After cleaning up the hurricane damage I put the saw aways following the same procedure that I described earlier.

Now 36 years later the saw still starts and runs and cuts well when needed. I think winterizing or following the manufacturer's directions with regard to off season storage is essential to keep any gasoline power tool running properly.

Re: Looking for chainsaw advice for infrequent user

#18

Don Leydens

Re: Guys, a little decorum, please!

Don Leydens

LMAO!!!! I agree!

Re: Looking for chainsaw advice for infrequent user

#19

***grin***

wilbur

If we all got rid of the tools that we only use once a year, our shops would be 45% smaller, on average. :D

Re: Looking for chainsaw advice for infrequent user

#20

Re: Looking for chainsaw advice for infrequent use

Harry Pye

Our club, Lehigh Valley Woodturners, had a demo/talk by a Stihl representative. He told us the alcohol in normal gas created all sorts of problems for chainsaws. One of his suggestions was to used the premixed fuel that is sold in the big box stores like Lowes and Home Depot. It is expensive, about $6/quart, but it has a long shelf life and minimizes most of the problems with old gas. Expensive, but not too bad if you are only using the saw a couple times a year.

Re: Looking for chainsaw advice for infrequent user

#21

I think David is wanting the ...

JamieDonaldson

...ultimate current Boy Toy from Santa, a new power washer!!!!