Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

Value Used Lathe

Posts

Value Used Lathe

#1

Value Used Lathe

Roy

I have a Jet JWL-1236 in very good condition and have upgraded to a larger lathe. Does anyone have advise as to how to value the lathe? My plan is to post it on my turning club newsletter, Craigslist and my website. Any other ideas?

Thanks in advance for your replies.

Re: Value Used Lathe

#2

Re: Value Used Lathe

Dick Coers

I'm thinking some where around $300-$350. They aren't very popular these days with the new EVS 1220 Midis going for around $600.

Re: Value Used Lathe

#3

Re: Value Used Lathe

roy

Thanks for the info but I couldn't find any of the lathes you mention for $600. Where do you find them? I'm located in San Diego. Thanks again for your post.

Re: Value Used Lathe

#4

Jim Evans

Re: Value Used Lathe

Jim Evans

I think the confusion might be that the 1220 EVS Jet is mini and not a midi. The mini goes for around $600 depending where you buy it.

Re: Value Used Lathe

#5

Rob Wallace

Re: Value Used Lathe

Rob Wallace

I sold my Jet 1236 for $300 about 8 years ago. I agree with Dick that this would be a good price. It is a good beginner's lathe, and is a great second lathe for knocking out spindles, etc. as needed if you already have a short-bed lathe. List it at least at "$350 or b.o." and you'd be able to come down to $300 if the lathe is in good shape, working well, and with standard accessories. (The "stock" accessories with the 1236 are the knock-out bar, a 6" face plate, 12" tool rest, a small 4-spur drive center, and a small "Chinese" live center.)

The lathes that have recently become popular replacing the 1236 and other 12" x 36"/42" are the new 12" midi-lathes with shorter beds such as the Jet 1220 and Delta 46-460 - both are available with 6-speed/belt change and in variable speed for about $ 475 and $600, respectively. If you need a longer bed for these you can get a bed extension, but for pen-turning and small bowl turning these make excellent lathes and are more compact.

Good luck selling the lathe - you should be able to sell it fairly quickly - there's always someone looking for a lathe in good shape to get started in woodturning or to diversify their turning equipment.

Rob Wallace

Re: Value Used Lathe

#6

Brad Vietje

Re: Value Used Lathe

Brad Vietje

I would agree that $300 would be a good asking price, but you may need to take $275 or $250 to sell it.

I bought a used one in 2002 (a 1997 model, I believe -- it is blue, not white) for $175 at a local tool auction, and I think it was a pretty good deal.

Safe spinning,

Brad Vietje

Newbury, VT

Re: Value Used Lathe

#7

Rob Wallace

Re: Value Used Lathe

Rob Wallace

My 1236 was also "Jet Blue".......

.....that is, before it was an airline!!

;)

Rob

Re: Value Used Lathe

#8

Dick Hines

Re: Value Used Lathe

Dick Hines

Why get rid of the small lathe. I have a PM3520 and a Jet mini and use them both. If you have room keep it.

Re: Value Used Lathe

#9

Re: Value Used Lathe