Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

sealing endgrain

Posts

sealing endgrain

#1

sealing endgrain

darrin hill

got a relative who cut down a tree on wednseday and wants me to take it off.. big mimosa tree... hopefully it hasnt cracked any...

but i have used paraffin to seal endgrain and not too fond of having to melt it.. dont have any anchorseal...

someone told me to use latex paint... anyone ever use it?

Re: sealing endgrain

#2

Re: sealing endgrain

Terry Scott

Hi Darrin

You need a sealer that slows down the evaporation not something like acrylic that seals it completely.Log seal allows the wood to breath

I learnt the hard way ,in fact I think acrylic is worse than not painting at all.

If I have wet wood that I am going to turn in a month I wrap with cling film.

By wet turning I have increased my success rate of having a bowl that is usable from 50% to 95%

Re: sealing endgrain

#3

Re: sealing endgrain

darrin hill

was gonna use laytex.. not acrylic....

is there a difference?

Re: sealing endgrain

#4

Re: sealing endgrain

darrin hill

well.. low and behold... i forgot my brother had a slight interest in turning at one time and bought 5 gallons of anchor seal... I forgot that he gave it to me..

wife probably will be annoyed in the morning. we're on our way to visit her grandpa, and the van is usually carrying a large assortment of baby stuff for our twins... i just put in a chainsaw, chain oil, and 5 gallon bucket of anchor seal... she will try to load the van in the morning... oh boy..

grandpa cut down the mimosa tree on wednseday. crossing my fingers it's ok and it's not in toothpick size.. with cracks..

the problem with woodcentral is all the turners are old and in bed before 9pm.. no one is on at 2am like me.. so i dont get my questions answered until the next morning.. lol

and i have to try to talk my wife into letting me bring back a van load of mimosa

and letting me store it under the twins clothes and toys..

and if the wood is good i have to bring a trailer 200 miles to get the rest... man am i nice to my relatives... i could buy a mimosa cheaper than driving to get it... but grandpa wants me to turn him some bowls from the tree for relatives... so... joy for me..

Re: sealing endgrain

#5

Re: "in bed before 9 pm ..."

Doc Green

Not where I live! I'm just getting started at 2 am. Just came from the shop where I'm putting the finishing touches on a tool handle (wood). Turned out nice! Think I'll give it to myself for Christmas.

Now that you found the anchorseal, I won't mention that latex paint will work, but not for long. With two coats, it may hold the wood for a month.

Good Luck! ~Doc

Re: sealing endgrain

#6

mimosa

D. Hansen

Darin if you have never messed with Mimosa if it is the same as what we call mimosa around here it has an oozy stickey sap that turns black So make certain you take something to cover it with so it won't get on the twins stuff.

Re: sealing endgrain

#7

Re: mimosa

Barry L Elder

Why not just coat the wood on-site and get it up off the ground a little and cover it if you can until you can get back with a trailer. It is just a matter of time before the g-men declare mimosa an invasive weed and outlaw its' sale. :D By the way, put on two coats of sealant.

Re: sealing endgrain

#8

Re: mimosa

Emmett Manley, Lakeland, TN

Some mimosa cracks, some doesn't. The wood tears up when turning, but sands and finishes into a beautiful product. Some people find the mimosa dust to be very irritating so be careful.

Exterior latex paint is designed to keep water out so it will keep water in, and it works well for me. When purchased from the "mis-tinted" section at Lowe's. top quality Latex paint can be purchased for $5 a gallon. The paint should last as long as any other paint job, unless the wood is very wet and the paint is dissolved from wood water.

Re: sealing endgrain

#9

Dan Jechura

Re: sealing endgrain

dan jechura

Old! I have not reached 59 yet? an getting to bed early for me is Midnight.

I seal with latex and ancorseal and have better luck wityh the ancorseal

Dan j.

Re: sealing endgrain

#10

Re: mimosa

jim 9 miles

I have had success with latex paint, usually 3 coats, as it soaks into end grain a lot. Second the miss tints at Lowes for $5.00. ( also use if for primer, or a first coat on paint projects )

Re: sealing endgrain

#11

seconding Emmett's post...

GaryG in MD

Mimosa "wood" and "dust" is listed as a "common" "extreme" "nasal irritant", so it would be wise to take proper precautions when turning -- including not letting it spread around your workshop where visitors can be exposed. ...Gary