Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

Easy Wood Tools- Easy Chuck *LINK*

Posts

Easy Wood Tools- Easy Chuck *LINK*

#1

Mike Stafford

Easy Wood Tools- Easy Chuck *LINK*

Mike Stafford

I came across this short video illustrating some of the features of the new Easy Wood Tools Easy Chuck. This chuck seems to have quite a few innovations that might make life easier for all of us. Jaw changing couldn't be easier if it is as easy as it appears in the video. The Zoom ring which allows rapid jaw adjustment without a tool should also be a boon to woodturners.

Apparently the chuck will come in 1"X8tpi and 1 1/4"X8tpi configurations.

I may have to plunk down my money and give one of these new chucks a try but they are not available until December 15th just in time for Santa to deliver. I have not seen a price list for this chuck or its jaws yet.


Easy Wood Tools - Easy Chucki

Re: Easy Wood Tools- Easy Chuck *LINK*

#2

Re: Easy Wood Tools- Easy Chuck *LINK*

Bill Howatt

John Lucas posted this thread about it.

Apparently price is $500. I can buy 2 Oneway Talons for that.

Bill


Easy Tools Post by John Lucas

Re: Easy Wood Tools- Easy Chuck *LINK*

#3

Mike Stafford

Re: Easy Wood Tools- Easy Chuck

Mike Stafford

I saw John's thread but I have not seen a price listed for it anywhere.

At $500 I cannot afford to add it to my chuck collection unless it comes with a full complement of jaws.

Re: Easy Wood Tools- Easy Chuck *LINK*

#4

Re: Easy Wood Tools- Easy Chuck

David Walser

I don't know how accurate that price (from WoodCraft) was. I looked for information a few weeks ago about the chuck and found the price to be about $250. (I cannot find the place where I saw the information, or I'd post a link.) I think some retailers have been creating "space" on their websites for the chuck and that any pricing shown is just dummied up for web layout purposes. Until the chuck is shipping to stores, we may not know what the price will be.

Re: Easy Wood Tools- Easy Chuck *LINK*

#5

Re: Easy Wood Tools- Easy Chuck

Bill Jacksonville, NC

Quite lively discussion over at IAP “shops, jigs, fixtures, and tools, Thread and links to price at WoodCraft. Extra jaws & spindle adapter sold separately according to Easy Wood & WoodCraft web pages. No price list for those items yet.

Re: Easy Wood Tools- Easy Chuck *LINK*

#7

Mike Stafford

Re: Easy Wood Tools- Easy Chuck

Mike Stafford

Wow, on that same page I see SuperNova II's for $169. For the same money as an Easy Chuck and a spindle adaptor you can buy 3 SuperNova II's.

Lots of innovation in the Easy Chuck but that $500 is gonna price lots of folks out of the market. Maybe the price will come down.....

Re: Easy Wood Tools- Easy Chuck *LINK*

#8

Re: Easy Wood Tools- Easy Chuck

Craig Daymon

The chuck does look really nice, but yeah, at $500 I can buy 3 (or 4) Axminster chucks and I have to say that I really like the one I just got recently (K10). I think I will take a tip from the video and round the outside corners of my chuck jaws. Axminster already rounds the ends of the slides for the same reason. Chuck key isn't impressive on the Axminster, but everything else seems top notch about it.

I wish these guys luck, because as I already said, it looks like a real nice chuck.

Re: Easy Wood Tools- Easy Chuck *LINK*

#9

Re: Easy Wood Tools- Easy Chuck

phillip medghalchi

Here is my take on this. they figure that once you buy one of them you are off the market for at least 4-5 years so they want their money up front. Now I know some of us do turn for the fun of it and as a hobbey. Well, if you do consider it then be ready to buy the $10,000 diamond that wife has been asking for it.

Re: Easy Wood Tools- Easy Chuck *LINK*

#10

Re: Easy Wood Tools- Easy Chuck

Bill Jacksonville, NC

I was shocked at cost of one chuck and no price list for extra jaws & spindle adapter. With more than one chuck not ready to buy an Easy Chuck and spindle adapter now.

Stopped to consider set up cost at machine shop, production cost, distribution cost made in America it is what it is! Innovation has serious cost!

Once get some favorable reviews from the must have tool junkies, sales will pick up. Bet other chuck makers taking notice. Could there be other deals down the road from other manufactures?

Whether like it or not most exciting development in chuck making today!

Re: Easy Wood Tools- Easy Chuck *LINK*

#11

Re: Easy Wood Tools- Easy Chuck

Joe Herrmann

I had the opportunity to inspect the Easy Wood Chuck last weekend at Hartville Hardware's big tool sale. Craig was nice enough to show me the chuck and to explain all the features. It is a great chuck with a lot of innovative features.

The price point is going to be the stickler for most folks. However, the chuck is 100% made in America on American made tools by American workers, which should count for something. Everyone wants the good jobs to come back to the US but no one is willing to pay the price for the goods produced here. You can't have the good jobs and still pay Chinese prices for the products. I guess we need to decide what we want?

Re: Easy Wood Tools- Easy Chuck *LINK*

#12

Steven Antonucci

Good point

steven antonucci

There was probably a point when someone thought that the first scroll chucks were too expensive compared to face plates. Innovators bear the brunt of R&D. The Chinese will have a copy on the market as soon as it is commercially viable because they do not have intellectual property laws in their culture.

I applaud the engineering that went into the design to create this new chuck, but I just don't know if there is going to be a market for this chuck? Part of any new product introduction has to be to market test an idea, and while the features are nice- they essentially compete with buying multiple chucks. Given the thought of having one chuck with quick swap jaws or two or three chucks without swapping jaws, I would probably take multiple chucks because I could leave work in progress in the chuck, and swap chucks faster than I could swap jaws.

Still, I applaud the concept and hope EWT can find a way to perhaps license the technology to the chuck makers? Seems like a good idea if the costs can get aligned with the market.

Steve

Re: Easy Wood Tools- Easy Chuck *LINK*

#13

Don Leydens

Another good point!

Don Leydens

Stephen has a good point also. I buy multiple chucks so I can leave certain unfinished projects in its original chuck. I love American workers, but can't justify that kind of expense at this time.

Re: Easy Wood Tools- Easy Chuck *LINK*

#14

Re: Easy Wood Tools- Easy Chuck

phillip medghalchi

Here is the point, we start the engineering aspect (design) of it and yes we have gotten spoiled by chinese prices, however we'd like to have American made product to keep American employed. On the other hands, the employers will not give raise to their employees because they want to keep the profit so you and I as employees will not have that extra money to buy the American made poduct. Take a look around every thing has gone up in prices, but most employees haven't gotten even cost of living increase in their paycheck and the employer's attitude is tht you are lucky to have a job. Economically this doesn't add up. Now, going to our field of activities, one way or another we are going to be tempted enough to pay this price once enough people brag about it. It's going to make it to our shop soon. We just have to figure out which one of those few family dinner outings have to be sacrificed for this gadget.

Re: Easy Wood Tools- Easy Chuck *LINK*

#15

Re: Easy Wood Tools- Easy Chuck

waltben

Even at three times the price of a Super Nova or G3 (that looks to be about the size) I'd buy one if I was starting out. Only need one chuck instead of the four various Novas I've got today in order to minimize having to change jaws. Looks too small to compare with anything larger, including a Titan. If they come out with a larger version, I'm certain that'll make a dent in the marketplace. I've already got what I need though.

Re: Easy Wood Tools- Easy Chuck *LINK*

#16

Re: Easy Wood Tools- Easy Chuck

Carole Valentine

My whole purpose for having multiple chucks is so I can have multiple projects going at the same time and not go through the hassles that occur once you take a piece out of the chuck and then try to remount it again later. I am neither so lazy nor in such a hurry that I object to changing jaws if necessary, but with multiple chucks and a good array of jaws, I think I have, for me anyway, the best of both worlds. I applaud the effort and design that went into the system...just not sure that at $500 it will take off! We cannot compete with Chinese slave labor, or even their "non-slave" labor. I certainly buy American when I can, but sometimes I just can't.

Re: Easy Wood Tools- Easy Chuck *LINK*

#17

Re: Easy Wood Tools- Easy Chuck

Emmett Manley, Lakeland, TN

It is interesting that we (Americans) want to sell our hamburgers, soft drinks, automobiles, computers, jet aircraft, technology, weapons, etc. all over the world,but we only wish to purchase items made in the good old USA.

At present many American automobiles are manufactured overseas and many Japanese and European automobiles are made in the USA by American workers. The Nissan plant near Jackson, Mississippi, extends one mile along I-55.

Like it or not, we are competing in a world market and if we cannot compete on a price basis, our quality needs to be outstanding. I have been burned too many times with American cars to purchase anything other than quality Japanese automobiles and I hate that situation.

Re: Easy Wood Tools- Easy Chuck *LINK*

#18

Two made in N. America Oneway Talons for less.


Re: Easy Wood Tools- Easy Chuck *LINK*

#19

Re: Easy Wood Tools- Easy Chuck

John Lucas

I just got my Woodcraft catalog. The extra jaws are fairly expensive as well. I'm like Carol. I like having extra chucks so that I leave a piece in there if necessary while working on another part. I'm doing that tonight. I'm working on a glue up and have one piece in the chuck that will stay there until the final step of the project. Having another chuck sped up truing and glueing the other parts.

Re: Easy Wood Tools- Easy Chuck *LINK*

#20

Re: Easy Wood Tools- Easy Chuck

steve worcester

Honestly, I think it is mildly innovative and radically overprice. American made has a price that is worth a varying value in todays climate (and I don't think that is driving the cost up that much, although I think I will hear views to the contrary) . But almost double what a high end chuck goes for today (Stronghold or Vicmark) which at that $ amount it has to deal with, I think is a deal killer. No, I haven't physically held one. But I am their primary market. I own 7 chucks today (no, don't need anymore) but as I school others on the subject, I just think it is way out there money-wise. What do I get for 2x the money? Maybe I am un-schooled in the inherent value on this?

Re: Easy Wood Tools- Easy Chuck *LINK*

#21

Keith Tompkins

Re: Easy Wood Tools- Easy Chuck

Keith Tompkins

Thanks Mike, I think the chuck in innovative, I like the adjustment ring and quick-change jaws. I do wonder how accurate the jaws are, and is there an adjustment if needed? I think the price problem is a matter of scale; if the company could produce thousands of chucks a day, the price would go down.

I have a similar problem with the gauge I market...I order parts for 500 units at a time. Many companies I've contacted have minimum order requirements of 10,000 units. In huge quantities, the part I'm paying (hypothetically) $15.00 each for now, will cost me $1.69 each. If made overseas, even less. I just cannot sell that many units.

I don't know easy-wood's machining capabilities, but if they aren't using cnc machinery for fabricating the chucks, they'll never be competitive. If they already have the capability that's fine, if not, is spending a minimum of 500K worth the investment on a small market item? I think we call this a catch22.

Re: Easy Wood Tools- Easy Chuck *LINK*

#22

Re: Easy Wood Tools- Easy Chuck

RCH

I believe they do handles etc with CNC, but not sure about the chucks. Their production center (at least for the tools) happens to be about a mile from my house (have only driven by, never stopped).