Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

Will it work?

Posts

Will it work?

#1

Will it work?

robo hippy

Well, as I was drifting off to sleep last night I had a vision. I am always trying to think of ways to make things easier to do. I do kind of like the hollow forms with the nice spiral coves carved down the length of them. I was thinking about what a pain they would be to sand out. Then it hit me, couldn't a reciprocating saw (like Milwaukee Sawzall) work with a sanding attachment? Variable speed, long stroke..... I think I have seen some small detail sanders that were reciprocating, but too tiny for my taste. Just wondering........

robo hippy

Re: Will it work?

#2

Re: Will it work? *LINK*

Henry (Raleigh, NC)

I have seen two ideas similar to what you are describing.

- My local Lowes carries (carried?) some version of non-saw blade attachments for reciprocating saws. One brand has a system that mounts into the blade holder and then has a quick release collet that holds hex shanked attachments. Stiff wire brush pads, scrapers (thin blades to remove flooring?), a file, grout remover? and maybe others types of attachments that I forget. I think it is their Kobalt brand - I found a link (below).

- I have also seen direct mounted attachments for such saws - SPyder brand I believe. In this case they do not have the quick release.

You could adapt some of these to sanding - perhaps by using adhesive sandpaper onto the side of a stiff blade.

Henry


Kobalt brand attachements

Re: Will it work?

#3

Pneumatic Belt sander *LINK*

John Lucas

Why not something like this. I have one but have only used it once. It eats up too much air for my itty bitty compressor. When I get the big compressor hooked up I'm sure I'll think up a project for this sander.


http://www.tooltopia.com/astro-pneumatic-223k.aspx?utm_source=nextag&utm_medium=cse&utm_term=AST223K&utm_campaign=nextag_r1

Re: Will it work?

#4

Re: Will it work?

Randy Gleckler

The Idea I was thinking of is, I have one of those new multi tools that everyone seems to have a copy of... blade vibrates side to side real fast... I figured with one of the cutter blades ground down to a straight edge (so it wouldn't cut) and a piece of the right side of velcro I'd have better control than with a recip saw and could change out the sand paper easier and faster for grits. Even have bought one of the Harbor Freight Knock offs to try it with...but haven't actually got around to trying it.

Re: Will it work?

#5

Re: Will it work?

Henry (Raleigh, NC)

Most multi-tools (oscillating) have a sanding attachment with Velcro. I have one and it works, slowly. I would only consider modifications if you needed a thinner profile or deeper reach.

Henry

Re: Will it work?

#6

Denis Putland

Re: Will it work?

Denis Putland

I do not think this is what you want??? but I have several home made atachments I made for a dewalt jig saw. work well but it is very heavy and cumbersome to use so it is not the real answer for an easy to use tool for your sanding.

For the various attechments I use extra heavy saw all blade cut to fit with some welding to hold and make an place for a velcro pad of what ever shape.

Denis

Re: Will it work?

#7

Re: Will it work?

John Lucas

I know this isn't what you want to hear but I find wood rasps, files, and sandpaper glued to sticks is very fast for that kind of work. You can have several sticks with different grits glued to them so it's just like having custom files to use.

Re: Will it work?

#8

How about bench mounting the recipe saw?

Dick Coers

The weight of those things might wear you out pretty quickly. Bench mount the saw, and then you could see the pad and action more easily.

Re: Will it work?

#9

Keith Tompkins

Re: Will it work?

Keith Tompkins

Yep. John you are right on..as usual!! Hand tools give better control, and rival power tools for speed unless very heavy work. I glue abrasive sheets to veneer, then cut up with scissors, but now use double stick tape meant for fabric..works great. Less chance of slipping with hand tools...no major gouges out of the work.

Re: Will it work?

#10

Re: Will it work?

John Lucas

Keith I use 3M super 77 spray adhesive. I just spray the stick, lay it on the sandpaper and then cut it out with a razor knife. That way I can make any shape stick I need.

Re: Will it work?

#11

Harry Robinette

Re: Will it work?

Harry Robinette

Air belt sander and air file from Harbor F.

Re: Will it work?

#12

Keith Tompkins

Re: Will it work?

Keith Tompkins

John, is it possible we were twins separated at birth? :D

Re: Will it work?

#13

Re: Will it work?

robo hippy

Thanks for the responses. The dowel with the abrasives on it is the idea I was trying to duplicate, but mechanized. Belt sanders are not rounded. The oscillating sanders don't move in a straight line, so not quite there. Rotary tools tend to climb out. The detail sanders have very short strokes. I do like the idea of bench mounting the Sawzall so I could hold the piece under it while it sanded. They can run at very slow speeds........ Just thinking, maybe it will come to me again some time as I start to drift off to sleep again.....

robo hippy

Re: Will it work?

#14

Under a turkey/tryptophan induced haze...

Dick Coers

you may just get the perfect idea. I'm counting on some beauties this week, well untill the family dysfunction with my older brother breaks the mood.

Re: Will it work?

#15

Re: Under a turkey/tryptophan induced haze...

robo hippy

Well, last nights thought was half round rings to fit on the angle drill. Probably would be very expensive to make. Abrasives on a dowel, the cheap method.

robo hippy

Re: Will it work?

#17

Re: Will it work?

robo hippy

From Marvin Hasenak over on SMC, How about an electric carving knife?

robo hippy