Bummer, me too. I stopped at a roadside flea mkt. They guy wanted $425 for a decent shaped 165lb anvil. I can buy it new for that. Then he wanted $60 for a side ax. I did buy a draw knife for $20. I can't believe you got that much wood for $45.
Dry thick stock is getting harder and harder to come by, at least here in Northern California, despite the fact that we have plenty of fairly large Claro Walnut trees. English Walnut used to be available back when Sillly Cone Valley was almost all orchards but almost all the walnut orchards have long since been bulldozed and burned.
I sure hope you still do flat work because it would almost be a crime to cut up nice boards into turning blanks.
In the tradition of the old usenet newsgroup rec.woodworking aka The Wreck - your score would be a GLOAT. Add the price you paid and it is also a NEENER so you've got a double bonus. So, again, in the tradition of The Wreck - YOU SUCK!
ps - If the walnut stains your hands - lime or lemon juice will take care of the staining.
Congrats on your score - and I hope you will be as good a steward of this valued wood and preserve some for the next generation of woodworkers.
If there is anything that makes me mad it is when one of my buddies goes out and buys loads of wood for pennies on the dollar and then brags about it. What makes it even worse is that Don already has enough wood in his 3 garages, shop, and 2 wood storage buildings to last like 3 or 4 lifetimes. Don has so much wood that the wood racks collapsed in one of his wood storage buildings and it took him a week to empty the building, rebuild the racks and restack the wood. Shame on you for being such a wood hog.
Yes, I admit it, I do have wood envy......
Now that I've got that off my chest will you save some of the 4X4's, 3X3's and 2X2's for me?
PLEASE remember to use adequate protection against the dust from all of that dry wood.... all wood dust is bad, but walnut can be quite nasty in particular.
Thanks guys. I meant to write back sooner, but it turned out to be 3 more loads yesterday and I was so beat afterwards, I just fell in bed and stayed there till this morning. Almost all the wood was under tables or behind something so all that bending down was a bit tougher than I thought. Sure was like an early Christmas, but ironically, a bunch of the wood will be used for Christmas presents. A bunch will also go to two clubs; one for resale at a profit for the club and some more to be used as raffle items for the other. Mike, Joe, Bob and whoever else is near by, you'll get a bunch also. PLENTY to go around, besides, I can't get in my garage any more. Neither can my tractor which is now under plastic in the driveway. I love giving wood away as much as I like gathering it!
Charlie (funny post), don't worry, the vast majority is small sizes of wood, the big stuff will be used for flat work.
Back to turning today, there is a piece of walnut somewhere in these piles that needs to be made into a long stem for a goblet.