Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

carving bit cleaning...

Posts

carving bit cleaning...

#1

carving bit cleaning...

darrin hill

i have some leftover dremel coarse cutting burrs that i use now on my weecher. I know there are better burs but im being frugal until next SWAT and using what i have...

but they keep getting clogged up with wood and stuff.. any way to clean em?

Re: carving bit cleaning...

#2

I use a brass brush


Re: carving bit cleaning...

#3

Re: I use a brass brush

darrin hill

can u soak em in anything to loosen the stuff up?

Re: carving bit cleaning...

#4

Re: I use a brass brush

Darryl

have you tried a match or heat source?

Re: carving bit cleaning...

#5

Harry Robinette

Re: I use a brass brush

Harry Robinette

I use the brass brush and if it gets stuck bad I burn it with a pen torch then the brush.

Re: carving bit cleaning...

#6

Leo Cuellar

Re: carving bit cleaning...

Leo Cuellar

A file card works well also as they are designed to clean files without damage.

Re: carving bit cleaning...

#7

Re: I use a brass brush

darrin hill

hmm.. just thought i should always avoid heating tools cause it messes with the temper...

Re: carving bit cleaning...

#8

Pitch Rx

Doc Green

Years ago I purchased a bottle of this stuff from Woodcraft for cleaning saw blades, etc., and it does a good job. Also years ago, after turning my first and last sappy-pine bowl, I used it to clean the rosin off my turning tools and bandsaw blade.

I've never used it on burrs, but I think it would loosen the gunk which could then possibly be removed by a brass brush or even a toothbrush. I would soak the burrs in the Pitch Rx for a few minutes (or an hour or so) and then try brushing.

Re: carving bit cleaning...

#9

end results

darrin hill

wire brushes didn't do anything, but making it glow red burned out all the wood fibers..

so i cleaned my burr bit and got to play with fire.. outside of course..