Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

copper wire fill

Posts

copper wire fill

#1

copper wire fill

John Lucas

I was turning a red oak mirror handle and it had 2 worm holes that ran all the way through. I thought that made a weak point. I usually fill with epoxy but it's hard to get it to go all the way through. I found some copper wire and ran it all the way through. Then filled around the wire with thin CA. It's probably not as strong as I would like but better than nothing and the copper looks interesting in the handle.


Re: copper wire fill

#2

Harry Robinette

Re: copper wire fill

Harry Robinette

Just a thought John, why not put a couple of turns around the handle then back into the second hole. Just a little bling.

Re: copper wire fill

#3

Don Leydens

Re: copper wire fill

Don Leydens

Another cool idea by John Lucas. Thanks!

Re: copper wire fill

#4

Pete G

Re: copper wire fill

Pete G

nice one John, I have also used soft drawn Aluminium wire :)

Pete

Re: copper wire fill

#5

Ellis Walentine

Reminds me of...

Ellis Walentine

... a pear log that I turned years ago that was full of buckshot. Now you have to get artsy with the placement of the little wire dots.

Why CA and not epoxy?

Ellis