Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

Lamp shade turning *LINK*

Posts

Re: Lamp shade turning *LINK*

#2

Re: Lamp shade turning

Don in Central Illinois

Does anyone know what wood he normally uses? I know one of the lampshade makers uses quaking aspen, but I don't have access to any of that.

Re: Lamp shade turning *LINK*

#3

Re: Lamp shade turning

David Walser

In the comments, it's said that the wood was some sort of pine.

Re: Lamp shade turning *LINK*

#4

Re: Lamp shade turning

David Walser

I'd like to get a closer look at the tool he uses for hollowing. It seems to cut very cleanly.

Also, notice when he's rouging out the blank at the beginning of the video. It doesn't appear that the roughing gouge is on the tool rest. I'm sure it's just an optical illusion, as everything he does seems to exemplify safety, proper technique, and efficiency.

Re: Lamp shade turning *LINK*

#5

Re: Lamp shade turning

Don in Central Illinois

David, I think he is using a hook tool for the hollowing.

Re: Lamp shade turning *LINK*

#6

Re: Lamp shade turning

Ed Larson

Soren Berger is the turner in the video. A couple of years ago he gave a demo to the Nor-CaL club in Sacramento and just this summer he did a demo for the Wood Chuck club Reno. He made the lamp shade at each demo. He used green Ponderosa/Jeffery pine in both demos. He makes and sells the hollowing tool. Of course I had to buy one. I live in Truckee north of Lake Tahoe were one primary wood is Jeffery pine. I have made three prototype shades just to understand the process, they are sitting on the workbench awaiting more inspiration. They were not too impressive to me, the wood is rather bland. I probably should have made the thinner and soaking them like the norfork pine people do is probably the way to go. Bottom line for me was that it was a lot of time making a lot of shaving and wasting a lot of wood with a not so good outcome. The hollowing tool does work well however.

Re: Lamp shade turning *LINK*

#7

Berger tool *LINK*

John Lucas

Well since it's Soren Berger doing the video I'm guessing he's using his own tool. Here it is.


http://www.woodturnerscatalog.com/p/7/2/32/133/-/3538/Berger-Endgrain-Hollowing-Tool/berger+tool

Re: Lamp shade turning *LINK*

#8

Re: Berger tool

Don in Central Illinois

Duh, never thought of it, and I knew he made an end grain tool, too.

Senior moments are getting more frequent.

Re: Lamp shade turning *LINK*

#9

Mike Stafford

Re: Berger tool

Mike Stafford

I have a Berger tool and when I initially received it I had a heck of a time getting it to cut efficiently. Finally ran into Mr. Berger in the vendor area at a symposium and had him give me a lesson.

It works pretty well but is another specialized tool that spends a lot of time in the rack.

Re: Lamp shade turning *LINK*

#10

Brad Vietje

Re: Lamp shade turning *LINK*

Brad Vietje

Pretty nifty technique, but not a very attractive shade.

Check out the work of Peter Bloch, of New London, NH. He uses Aspen, usually somewhat spalted for color and interest, and while he doesn't have a cool time lapse video, I like his shades much better:

www.woodshades.com

Safe spinning,

Brad Vietje

Newbury, VT


http://www.woodshades.com

Re: Lamp shade turning *LINK*

#11

Re: Lamp shade turning

John Lucas

I ran the video camera for Peter at an AAW symposium. That was the first time I'd ever seen anything like that. I was blown away. His shades are fantastic