Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

Expanding Collets from Beall *LINK*

Posts

Expanding Collets from Beall *LINK*

#1

Expanding Collets from Beall *LINK*

Chuck Bjorgen

Received an email from The Beall Tool Company today which promoted their new tool catalog. What caught my attention was the new line of expanding collets that would substitute for having to turn internal jam chucks for some items such as pepper mills. What I can't figure out is how these are attached to the headstock. The collects have a protrusion on one side of the device. I'm wondering if there is threaded mount that is supposed to be usd for the particular thread of a lathe's drive screw. I've bought a few Beall items over the years, otherwise no connection. Here's the link:


Beall Expanding Collets

Re: Expanding Collets from Beall *LINK*

#2

Very interesting

David Walser

This looks like a great idea. Beall produces high quality equipment and the price, $89 for the set of collets, seems to be very reasonable.

As for how the collets are mounted to the lathe, the description says that the collets have a 1/2" mounting shaft. This means the collets can be mounted using a drill chuck or a collet chuck mounted in the headstock. Very cool!

Re: Expanding Collets from Beall *LINK*

#3

Sweet I like them


Re: Expanding Collets from Beall *LINK*

#4

Re: Very interesting

Chuck Bjorgen

As for how the collets are mounted to the lathe, the description says that the collets have a 1/2" mounting shaft. This means the collets can be mounted using a drill chuck or a collet chuck mounted in the headstock. Very cool!

Of course, now I see it. Thanks. I'm definitely interested.