Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

Gluing Acrylic

Posts

Gluing Acrylic

#1

Gluing Acrylic

JohnT

I'm thinking of turning a wizard's wand from acrylic material - some of the pen blanks could be really interesting.

I would, however, need a larger piece of acrylic than a standard pen blank.

Is it possible (and safe) to glue up several pen blanks to make a longer blank?

I suppose I could pour my own, but I really like the convenience of using pen blanks - there are some really cool color combinations out there...

Thanks.

-John-

Re: Gluing Acrylic

#2

Re: Gluing Acrylic

Chuck Engstrom

Hi John -- MSC sells acrylic rods in various lengths and diameters, very reasonable prices. Just go to their website www.mscdirect.com and search for "acrylic." 1/2-inch by 6 feet shows up for less than $7 when you work your way down to it.

Good luck with the project --

Chuck

Re: Gluing Acrylic

#3

Re: Gluing Acrylic

dick gerard

If you purcase your own acrylic rod, make sure it is cast not extruded. Extruded acrylic will quickly gum up the works, whereas cast acrylic turns, well, like acrylic. DAMHIKT.

Re: Gluing Acrylic

#4

Re: Gluing Acrylic

Dick Coers

With the possiblility of chatter when turning that thin, I wouldn't do it. Depends on the acrylic, but some can be really brittle. Plastic shards and broken glue joints doesn't sound like fun.

Re: Gluing Acrylic

#5

Re: Gluing Acrylic

John Lucas

John If I tried it I would turn a small tenon on one end and drill a mating hole on the other blank to give you a mechanical bond as well as the glue bond. Gluing plastics can always be interesting. sometimes I have fantastic results and other times no matter what glue i use it simply doesn't bond well.

Re: Gluing Acrylic

#6

Dennis in Southern Oregon

Re: Gluing Acrylic

Dennis in Southern Oregon

John, YOU could probably hand chase the hole and tenon and not need any glue. :D I remember seeing Bill Jones do that with a couple of faux ivory rods in a demo.

Dennis

Re: Gluing Acrylic

#7

Re: Gluing Acrylic

John Lucas

I just bought a book by Bill Jones this weekend. Haven't had time to do anything more than just thumb through it so far.

Re: Gluing Acrylic

#8

Dennis in Southern Oregon

Re: Gluing Acrylic

Dennis in Southern Oregon

Sadly, he passed a couple of years ago.

Dennis

Re: Gluing Acrylic

#9

Thanks

JohnT

Thanks for all the replies -

Chuck: Thanks for the website, but all I see are clear rods - I was hoping to use colored material as in pen blanks. Re-thinking the wand, though, and if I can rig some color LED lights into a clear rod, I may have something.......

Dick - yes, I'm afraid of the thing chipping or flying apart, too.

John -Using a tenon makes great sense to increase the glue surface area. Not sure what glue would hold, though....

Dennis - Obviously, you're over estimating my abilities at the lathe....

Thanks again for all the replies - I'll try pouring my own blank and see how it goes.

-JohnT-